Hello, I have an
Asus Strix g g531gu-al065
the board has the markings g531gw rev. 1.6
with i7-9750h nvidia 1660ti,
SN:K9NRCV01U42136a
it looks like this so that all voltages are OK, the laptop "starts" but the voltage is constant
1.3A supplied by the service power supply, (I reset the BIOS by unplugging it
battery, RAM checked on 2 laptops and 2 slots)
It does not provide an image either on the matrix or via HDMI, the fans start running after some time but with no effect
constant speed while trying to turn off the laptop by holding the button
5-10sec it turns on again. I pulled out the bios and compared the loads with several
from the Internet, do not coincide with each other. I came up with the idea to download the bios
from the manufacturer's website, but I'm not advanced enough to help
Does anyone know how to replace the manufacturer's file with a bin file for the programmer?
I don't know which BIOS version should be correct, the motherboard or the case model.
Guide about it? Or can anyone help me and prepare a ready bios? Any tips on how to move forward? They are slowly coming to an end
ideas
Oryginal bios in Attachment
Asus Strix g g531gu-al065
the board has the markings g531gw rev. 1.6
with i7-9750h nvidia 1660ti,
SN:K9NRCV01U42136a
it looks like this so that all voltages are OK, the laptop "starts" but the voltage is constant
1.3A supplied by the service power supply, (I reset the BIOS by unplugging it
battery, RAM checked on 2 laptops and 2 slots)
It does not provide an image either on the matrix or via HDMI, the fans start running after some time but with no effect
constant speed while trying to turn off the laptop by holding the button
5-10sec it turns on again. I pulled out the bios and compared the loads with several
from the Internet, do not coincide with each other. I came up with the idea to download the bios
from the manufacturer's website, but I'm not advanced enough to help
Does anyone know how to replace the manufacturer's file with a bin file for the programmer?
I don't know which BIOS version should be correct, the motherboard or the case model.
Guide about it? Or can anyone help me and prepare a ready bios? Any tips on how to move forward? They are slowly coming to an end
ideas
Oryginal bios in Attachment
Comment