HP EliteBook 835 G7 Bios Request

[max_sneka2]

Good evening Everyone

I need Bios Bin File For Hp elitebook 835 G7

Board Number LINDEN 6050A3147201-MB-A01 (A1)

Here is Old Bios File

[Vesko356]

Good evening Everyone

I need Bios Bin File For Hp elitebook 835 G7

Board Number LINDEN 6050A3147201-MB-A01 (A1)

Here is Old Bios File

Read the rules before posting
RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
https://www.badcaps.net/forum/troubl...before-posting

You MUST:

• Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.
• Name your thread with make, full model numbers and request
• Provide a BIOS/EC dump if possible
• Post what the problem is, be specific - black screen, no boot, running slow, password. Do NOT post "clean me", "clear bios", "clean bios", "fix bios", "bios need" or other such terms

[max_sneka2]

Read the rules before posting
RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
https://www.badcaps.net/forum/troubl...before-posting

You MUST:

• Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.
• Name your thread with make, full model numbers and request
• Provide a BIOS/EC dump if possible
• Post what the problem is, be specific - black screen, no boot, running slow, password. Do NOT post "clean me", "clear bios", "clean bios", "fix bios", "bios need" or other such terms

Bios Issue . Black Screen . Turned Off after failed update of bios

S.N 5CG0330FLM

[barbarian2009]

Board Number: LINDEN 6050A3147201-MB-A01 (A1)
ProdID: 8RN38AV
SN# 5CG1271K42
Build ID: 20WWLDDT601#SAK8#DAK8

I tried to remove the password, read BIOS with CH341A (3.3V fix) programmer. BIOS was read in NeoProgrammer 2.2.0.10. Dump data was read and checked 4 times (compared in HxD). Deleted data area 37000 to 37820 via Hxd. Flashing. At power on, the power LED is on and caps lock flickers 7 times. Flashed back dump BIOS and still the laptop does not turn on. I think the dump is corrupted. Please see how bad it is. (Pardon my English)

[barbarian2009]

try

Thank you. I tried that but it didn't work. At first it tried to turn on (even the fan was spinning) but then caps lock started flickering again and won't turn on.

[danito]

Board Number: LINDEN 6050A3147201-MB-A01 (A1)
ProdID: 8RN38AV
SN# 5CG1271K42
Build ID: 20WWLDDT601#SAK8#DAK8

I tried to remove the password, read BIOS with CH341A (3.3V fix) programmer. BIOS was read in NeoProgrammer 2.2.0.10. Dump data was read and checked 4 times (compared in HxD). Deleted data area 37000 to 37820 via Hxd. Flashing. At power on, the power LED is on and caps lock flickers 7 times. Flashed back dump BIOS and still the laptop does not turn on. I think the dump is corrupted. Please see how bad it is. (Pardon my English)

try

[barbarian2009]

try

Deleted the first byte from your file and the laptop turned on. Thank you.

[barbarian2009]

That didn't fix the problem. Now the notebook does not turn on the first time. It says: Final step of BIOS update. Then it reboots and flickers caps lock 7 times. Several times I managed to boot into Windows and flash SN, PCID, CTNumber, FeatureByte, BuildID via BCU. If you turn off and disconnect the RTC battery for a while and then reconnect it again, it may turn on. Is this a problem with the firmware in the second chip?

[barbarian2009]

Finally solved the problem.
What I did:
1. Completely cleaned the second BIOS chip. And soldered it in place (without writing anything into it)
2. In the main BIOS chip flashed the files that threw “danito” (In them BIOS built from the update on the official site HP).
3. Main BIOS chip soldered on the board.
4. Check the soldering! Everything is soldered.
5. Via BIOS Configuration Utility flash SN, PCID, CTNumber, FeatureByte, BuildID
Done. No more passwords and no more Security Endpoint controller Problem errors.

[spawnx212484]

Bios Issue . Black Screen . Turned Off after failed update of bios

S.N 5CG0330FLM

Hi, have you found a solution? I've had two PCs in a week with corrupted bios...

[batuhanca]

If you want, try these as well.

[spawnx212484]

Perfect, it works, but when the computer starts up I get "manufacturing programming mode", is that a problem? don't I have info to recover from the dead bios?

[danish8717]

hp 835 g7
serial no 5CG11551MC
sound not working

[tcccorp]

hello,

I read there is 2 flashs on this laptop but I'm just able to find one, near nvme ssd. Could you say me where is the second one ?

thanks

[peste]

hello,

I read there is 2 flashs on this laptop but I'm just able to find one, near nvme ssd. Could you say me where is the second one ?

thanks

search both sides..

[tcccorp]

hello Peste,

Thanks, i checked other side and i found another flash, TPM and security chip !

[sergg_zp]

HI,
HP Eleitebook 835 G7

Part Number - 8RN39AV
Serial Number - 5CG1204DYT

Caps lock blinking 7 times. Please help.

[peste]

post merged..next time look for a thread with the name and model, motherboard model of the laptop, and post there, if you can't find it, then make a new thread..
read the forum rules..
https://www.badcaps.net/forum/troubl...before-posting