NP930XED Samsung Galaxy Book2 Pro Laptop Firmware Fix request

[sikocan]

Hi all,

As per original post here:
https://www.badcaps.net/forum/troubl...-firmware-loop

Attached are 2 chip dumps. I've removed windows serial from BIOS file. Please let me know if there is anything I can try?

Device serial/model details:
R11HFT4300147 11297 BA92-23239B 04 02 DAP-3A DAP201501 VENUS2-13 ADL NPC M0U901T4600100

[sikocan]

Following the guide on https://www.badcaps.net/forum/troubl...update?t=88206 here is the extracted BIOS.

[Gcs_rma]

Hi all,

As per original post here:
https://www.badcaps.net/forum/troubl...-firmware-loop

Attached are 2 chip dumps. I've removed windows serial from BIOS file. Please let me know if there is anything I can try?

Device serial/model details:
R11HFT4300147 11297 BA92-23239B 04 02 DAP-3A DAP201501 VENUS2-13 ADL NPC M0U901T4600100

NP930XEDA-EXP, NT930XEDA-CSM, NT930XEDA-GOV

[sikocan]

Thanks for sharing. What are these 2 files for in your zip file?
amiflashefi.nsh
AfuEfix64.efi (maybe for 25q80dvnjg chip? Not sure).

Thanks again for sharing.
Ahh, after seeing this, https://pdfcoffee.com/how-to-update-...-pdf-free.html, the AfuEfix64.efi is a command line software run in uefi shell. How do you get into uefi shell.

[Gcs_rma]

Thanks for sharing. What are these 2 files for in your zip file?
amiflashefi.nsh
AfuEfix64.efi (maybe for 25q80dvnjg chip? Not sure).

Thanks again for sharing.

you flash bios 32mb 25r256v

[sikocan]

This is the result, https://www.youtube.com/watch?v=bjXgEoP91As

It does not pass POST. It's boot looping. The Charger LED actually has a diagnostic LEDs which is pretty cool, too bad it's documentation not available. But in this case, obviously BIOS is not compatible most likely.

[Gcs_rma]

Need picture mainboard

[Gcs_rma]

try

[SMDFlea]

DMI

10A0094 - 10A015F

10A2000 - 10A203F (key XXXXX-XXXXX-XXXXX-XXXXX-XXXXX)

[SMDFlea]

This is the result, https://www.youtube.com/watch?v=bjXgEoP91As

It does not pass POST. It's boot looping. The Charger LED actually has a diagnostic LEDs which is pretty cool, too bad it's documentation not available. But in this case, obviously BIOS is not compatible most likely.

Try the P12RGE bios above.If it doesn`t work flash 1MB of zeros or FF`s to the PD FW chip from this post https://www.badcaps.net/forum/troubl...ware#post74354 .Try booting on battery only if there`s plenty of charge in it.If it boots to windows run the bios update exe ,and see if it will flash the firmware or not

[sikocan]

I'll try tomorrow. Thank you

[sikocan]

Need picture mainboard

Pictures attached.

try

I've tried this, the behaviour is same as original fault. After programming, with a full battery only, no charger connected, turned on, Samsung logo flashed 3 times over 2 minutes or so eventually turned on as usual, the same behaviour persists, starts into PD firmware update on a loop.

[sikocan]

Try the P12RGE bios above.If it doesn`t work flash 1MB of zeros or FF`s to the PD FW chip from this post https://www.badcaps.net/forum/troubl...ware#post74354 .Try booting on battery only if there`s plenty of charge in it.If it boots to windows run the bios update exe ,and see if it will flash the firmware or not

Hi mate,

Which is the PD Firmware chip?, is it the 25Q80DVNIG?

DMI

10A0094 - 10A015F

10A2000 - 10A203F (key XXXXX-XXXXX-XXXXX-XXXXX-XXXXX)

I marked the Windows serial number as XXXXX to protect the owner's device.

[SMDFlea]

Hi mate,
Which is the PD Firmware chip?, is it the 25Q80DVNIG?
I marked the Windows serial number as XXXXX to protect the owner's device.

Which is the PD Firmware chip?, is it the 25Q80DVNIG? , Yes the 1MB chip
I marked the Windows serial number as XXXXX to protect the owner's device . Yes i know, ive given the offsets so that other members can use their own from their backups.

I`ll post some firmware for you to try later,i don`t know if it will work or not.

[sikocan]

Alright, thanks, so I'm going to now write 0s into the 1mb chip and update you tomorrow.

[SMDFlea]

Alright, thanks, so I'm going to now write 0s into the 1mb chip and update you tomorrow.

Try these as well.

[sikocan]

Hi mate, it's the same result with these 2 test1/2 zip files. As mentioned before the same PD firmware update happens without this chip installed meaning most likely it's actually programing the PD chip that I've replaced. Looking at the sellers description and title shows that this is a programmable chip.
https://s.click.aliexpress.com/e/_DeNsf89 - "CYPD6227-96BZXI FLASH（64kB）ROM（96KB)"

I believe this is the issue.

[sikocan]

I've realised my mistake, my original chip was CYPD6228 not CYPD6227. Damn. I'll get new chip and try again. Sorry to have wasted all of your time team. Thank you.

[SMDFlea]

Mistakes happen. Flash the original 1MB backup back again as its signed with an RSA public key.