Clevo W253EU bios file needed

[con23]

I have a Clevo W253EU laptop that the screen does not open and the fan starts at maximum speed I think it is a problem in the bios and for that I need the bin file to reprogram it. I know the website https://repo.palkeo.com/clevo-mirror/W2xxEU/ and I have downloaded the appropriate bios update but it is not in bin format And it is in 6mb (W240EU.03) which does not fit in this case what can i do ? I have the ch341a programmer

[SMDFlea]

I have a Clevo W253EU laptop that the screen does not open and the fan starts at maximum speed I think it is a problem in the bios and for that I need the bin file to reprogram it. I know the website https://repo.palkeo.com/clevo-mirror/W2xxEU/ and I have downloaded the appropriate bios update but it is not in bin format And it is in 6mb (W240EU.03) which does not fit in this case what can i do ? I have the ch341a programmer

It needs splitting to 2MB and 4MB. You can do that with a hex editor or use FIT Flash Image Tool. Open the 6MB bios with ME Analyzer and check the firmware version (its 8.1) .Download ME System Tools v8 from https://mega.nz/folder/qdVAyDSB#FLCPaDVIsPYiy2TAUjD7RQ .Extract the system tools,inside the Flash Image Tool folder there are 2 versions, just choose the oldest.Run fitc.exe ,drag the 6MB bios onto the fitc window.Click on build/build image .Inside the Build folder fitc has split the 6MB bios into a 2MB outimage(1).bin and 4MB outimage(2).bin .There are 2 bios chips on your board,flash both of them,but make backups first.