my friend
pegatron h36t
rev.2.3
intel processor
ati graphics card
bios+ec flash dump help
thanks
pegatron h36t
rev.2.3
intel processor
ati graphics card
bios+ec flash dump help
thanks
-
-
Re: pegatron h36t dump flash
Lol -
Re: pegatron h36t dump flash
Do you share H36T rev 2.3 bios fileOriginally posted by spideyComment
-
Re: pegatron h36t dump flash
Try this
Pegatron H36T rev: 2.3
MX25L3205A (Main)
PM25LV512 (EC)Comment
-
Re: pegatron h36t dump flash
lol maybe i could help if only i understand what they sayIm Back... sort of...
Comment
-
Re: pegatron h36t dump flash
h36t ver 2.3 pch bıos and me region need
equipment failure: automatic opening-off you say continues to spin-off the fan shuts off the screen at you says kitleniyor shutting display faults like this
thank youComment
-
Re: pegatron h36t dump flash
pegatron h36t
rev.2.3
ati graphics card
biosLast edited by SMDFlea; 10-29-2022, 01:58 AM.Comment
-
Thanx bro gjComment
-
Hi guys
I need the Flash Dump (.bin) file of the Traktor Kontrol S4 MK1. SPI chip number is 25DF041A from Atmel (4Mbit)
So please let me know if you have the .BIN Dump of this model and its price and the payment method.
I appreciate your help. -
Dear folks, recently got a canon dr-1210c and it worked perfectly just for one day. Right now it shows all possible errors on the screen and do nothing. I tear down the device and found a 32 pin plcc flash chip. I thought reprogramming firmware might be helpful. The firmware update file from canon support include a dll file which doesn't help. So if anyone has the dump it would such a great favor to share.04-15-2025, 02:43 PM -
Hello, I'm stuck in troubleshooting…
The flash system works like that : when the (mechanic) flash button is pressed, the flash mecanically pop up, and a circuit buck boost elevate 7v (batt) to 200-300v (?) for charging the big capacitor. And when the photo shoot button is pressed, the capacitor is discharged in the xeon light.
In the D800, there is a first « power board » close to the battery. 2 wires (batt 7v) goes to another little « flash board ». I measured 7v, so ok.
When I press the flash button, it's detected by the system, flash icon appear on LDC display.... -
Hi, the SIO firmware flash in my lenovo P720 seems to be corrupted, after a reboot POST fails with CPU1 fan failure and all fans set to max, proceeding with booting shows SIO FW no response.
I've tried using the lenovo sio update utility but that fails with "EC Autho Value not Match" when the system reboots for the update. The efi update tools has a S04FW.cap file but it's 256kb which seems too small?
S/N S4PD6489... -
Hello everyone.
I have L460 Type 20FV (2 X 8MB bios chips) with no boot issue after BIOS update (black screen with restarts, common issue on this model + BIOS update).
BIOS dump(s) from this post https://www.badcaps.net/forum/showpo...7&postcount=27 makes the laptop boot absolutely fine, no delays, etc..
But there is an exclamation mark in the device manager for the LAN card right after fresh OS installation - LAN naturally doesn't work. I saw requests like "BIOS: fix LAN" on other sites.
Could someone point on a direction...
Comment