need bios dell latitude 9520

[ekonom-pc]

Thanks, I'll try it now

[EthanMai]

Try with this file:

Unfortunately, it has a password.

[EthanMai]

Try with this file:

Please remove the password. Thank you

[rex98]

Please remove the password. Thank you

1st boot, press F2, write service tag, disable Absolute, save (Apply changes), restart. 2nd boot press Alt+F to exit manufacturing mode.

[EthanMai]

1st boot, press F2, write service tag, disable Absolute, save (Apply changes), restart. 2nd boot press Alt+F to exit manufacturing mode.

Works perfectly, thanks for your time. Have a great day.

[Dangvantu]

hi
stuck on logo
Someone please help
sevicetag : DHK31J3

[LBTT1121]

I received a repair for a 9520 machine that was stuck on the Dell logo, so there was no Servicetag, and the parameters below the machine were blurred. Can someone please help?
Main LA-K441P

[rex98]

I received a repair for a 9520 machine that was stuck on the Dell logo, so there was no Servicetag, and the parameters below the machine were blurred. Can someone please help?
Main LA-K441P

try use my post above # 24 https://www.badcaps.net/forum/troubl...07#post3297607

[LBTT1121]

try use my post above # 24 https://www.badcaps.net/forum/troubl...07#post3297607

I have loaded this file but the computer does not display it

[hoaca388]

I have loaded this file but the computer does not display it

Latitude 9520

Service Tag: 6DY03M3

[LBTT1121]

The device displays the Dell logo and flashes 3 yellow 6 white, perhaps my problem is that the original bios is missing, the customer has already taken it to another place for repair, thank you very much.

[ELOUALI]

hi every body !
I need remove bios password and disable Absolute for laptop dell latitude 9520
PCB: La-k441 rev1
service tag : GRPCZH3
can help ?
Thanks!

[hoaca388]

hi every body !
I need remove bios password and disable Absolute for laptop dell latitude 9520
PCB: La-k441 rev1
service tag : GRPCZH3
can help ?
Thanks!

Try

[LEO037_2029_]

hi, try and feedback

[ELOUALI]

hi, try and feedback

Hello dear friend, thank you very much for your help.
After the test, the password was removed, but my nVMe is no longer detected, and I can't deactivate Absolute.
See attached photos.

[ELOUALI]

Try

Hello dear sir, It's always kind of you, thank you very much for your initiative.
After testing your file, the machine boots but no image appears.

[lapfix]

Hello dear friend, thank you very much for your help.
After the test, the password was removed, but my nVMe is no longer detected, and I can't deactivate Absolute.
See attached photos.

1st boot, press F2, write service tag, disable Absolute, save, restart.
2nd boot press Alt+F to exit manufacturing mode.
Good luck

[lapfix]

Hello dear sir, It's always kind of you, thank you very much for your initiative.
After testing your file, the machine boots but no image appears.

Don't post in several place your demand.it's waste time for us

[hoaca388]

Hello dear sir, It's always kind of you, thank you very much for your initiative.
After testing your file, the machine boots but no image appears.

Again

[ELOUALI]

1st boot, press F2, write service tag, disable Absolute, save, restart.
2nd boot press Alt+F to exit manufacturing mode.
Good luck

Thank you for your interaction and your help.
After the test, the password was removed, but my nVMe is no longer detected, and I can't deactivate Absolute.
See attached photos.