HP Elitebook 1040 g6 need dump bios

[Friend33]

The EC is restoring the DMI to the main bios you tried.

What do I have to do to get the notebook to start again? I only flashed the main BIOS from this thread, I specifically chose the one without DMI. Don't I need the second file yet? I suspected that there was something wrong with the EC chip, but I can't find a file for that here, so I thought someone could edit my dumps.

[Friend33]

I read out my EC again and the data status changed due to the many attempts with the main dumps. I reloaded the status that I had saved. Then I flashed the main again with the file without DMI, but it still doesn't work. After starting, this "Final Step" screen appears immediately and the fan spins up really fast, which is actually completely normal, but nothing happens. I left it running like that for an hour and nothing happens. What could be the reason for this or what can I do?

Can a friend help me?

[icareservicezone]

HP EliteBook X360 1040 G6
Product ID : 5UN71AV
SN : 5CG9483W7L
hp logo stuck problem, os not run, please help

[hoaca388]

HP EliteBook X360 1040 G6
Product ID : 5UN71AV
SN : 5CG9483W7L
hp logo stuck problem, os not run, please help

HP EliteBook X360 1040 G6

[zszahid]

Plz any brother clean me region for my bios , orignal bios was damaged , i pick other bios from a donor board , display is ok but coming late
Hp elitebook x360 1040 G6
Product id 8PC60UP#ABA
S/N # 5CG0176P92
BUILD ID #19WWBRBT601#SABA#DABA

[Muhammad Akram]

Hi
i need help, Hp Elitebook x360 1040 G6

Product ID: 7XV73UT#ABA
Serial No: 5CG0324B60

Laptop on but no display & fan is spinning fast
Here is the original dump if anyone could repair it.
regards

[chumatez]

HP Elitebook X360 1040 g6 Bios Bin Needed
The issue is that the laptop continuously Re-starts on its own ,No Display and the Fan blows at higher speed

HP Elitebook X360 1040 g6
ProdID 9UR31US#ABA
SN# 5CG012C1DH

[SMDFlea]

Thread merged..next time look for a thread with the name and model, motherboard model of the laptop, and post there, if you can't find it, then make a new thread.

[Kurry]

Hello,

I had the problem that the laptop got stuck in Final Step of BIOS Update:

Desoldering and programming only the 32MB Winbond did not work.

My solution was:
-Desolder both BIOS WINBOND chips (32 + 16MB).
-Programming the 32MB chip with BIOS from Post 10 (Without DMI)
-Programming the 16MB chip with EC File from Post 15
-Re-Solder and turn on the laptop; leave the Laptop alone: it took about 3-4 hours to process everything!!!
-Program all values (SN, Feature Byte, etc.) with HP BIOS Configuration Utility (BCU)
-Updating the BIOS to the latest version via USB-Ethernet Adapter in the BIOS itself (for me it won't worked in Windows 10, nor in the BIOS providing the new BIOS File via USB Stick)

Bye, K