hp 15-af156sa

[adamski1952]

HI all.
Looking for a clean bios for hp 15-af156sa.
Thanks in advance.

[Vesko356]

Re: hp 15-af156sa

HI all.
Looking for a clean bios for hp 15-af156sa.
Thanks in advance.

Read the rules before posting:
RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*

Add:

• Serial number.
• Original bios dump.
• Issue description.
• Board model number.

.

[adamski1952]

Re: hp 15-af156sa

Sorry.
I dont have the laptop to hand. I will post more info when the owner brings it to me.

[adamski1952]

Re: hp 15-af156sa

I have just been given the serial number. CND53581WB

[lapfix]

Re: hp 15-af156sa

I have just been given the serial number. CND53581WB

With this SN , we can only give you bios image , but with your main bios we can repair it with this bios img

[adamski1952]

Re: hp 15-af156sa

Thank you. I'll post bios dump whe get it.

[Vesko356]

Re: hp 15-af156sa

Sorry.
I dont have the laptop to hand. I will post more info when the owner brings it to me.

You must submit your request according to the rules, if you not ready to do that just don't post.
Keep in mind, there will be no further remarks about this. Next time the thread will be deleted as per the rules.

[adamski1952]

Re: hp 15-af156sa

Apologies to all.

The full details are MODEL hp15-af156sa. serial no. CND53581WB. MB ABL51 LA-C781P. Bios dump attached. (Laptop boots but no display.)

[Vesko356]

Re: hp 15-af156sa

Apologies to all.

The full details are MODEL hp15-af156sa. serial no. CND53581WB. MB ABL51 LA-C781P. Bios dump attached.

Try:

[adamski1952]

Re: hp 15-af156sa

Thank you vesko356.
The bios workes fine. Just keep getting message(Manufacture programming mode is in unlocked mode) on boot,but better than a black screen.

Regards. adamski1952

[Vesko356]

Re: hp 15-af156sa

Thank you vesko356.
The bios workes fine. Just keep getting message(Manufacture programming mode is in unlocked mode) on boot,but better than a black screen.

Regards. adamski1952

Try HP BCU (Bios Configuration Utility) ---> https://ftp.ext.hp.com/pub/caps-soft...it/HP_BCU.html
Guide ---> https://www.youtube.com/watch?v=kQJu...hannel=IT-Tube

Use HP BCU to exit the Manufacture programming mode is in unlocked mode.

P.S. If you have difficulties I can give you a new dump with MPM locked, but do it with the HP BCU to avoid re-flashing the chip again. It's pretty easy to do it with the tool.

.