Hello, I'm working on an HP Pavilion 15t-eg100, part number 43F48AV. Upon attempting to power-on, the caps lock blinks twice and it shuts off. HP indicates this blink code means corrupt bios. (The owner stated it worked when they last shut it down, but failed to boot next time they went to use it.)
I've attempted the BIOS recovery steps published by HP (e.g. ctrl-v, ctrl-b, ctrl-esc) without success. (Including creating a BIOS recovery usb flash drive).
Attached is a dump of the contents of the GigaDevice 25B127DSIG chip (dumped using TL866A programmer, using settings for Winbond W25Q128BV).
The motherboard is a DA0G7HMB8H0 Rev H. (HP part number M74949-601)
The latest bios for this laptop is available from HP at: https://ftp.hp.com/pub/softpaq/sp143...0/sp143436.exe (I think it's the 0898A.bin file).
I've searched these forums but could not find a thread for an HP with this chip with a corrupted bios.
I'm hoping someone take the DMI info from the dump and incorporate it into the latest bin file from HP please?
I've attempted the BIOS recovery steps published by HP (e.g. ctrl-v, ctrl-b, ctrl-esc) without success. (Including creating a BIOS recovery usb flash drive).
Attached is a dump of the contents of the GigaDevice 25B127DSIG chip (dumped using TL866A programmer, using settings for Winbond W25Q128BV).
The motherboard is a DA0G7HMB8H0 Rev H. (HP part number M74949-601)
The latest bios for this laptop is available from HP at: https://ftp.hp.com/pub/softpaq/sp143...0/sp143436.exe (I think it's the 0898A.bin file).
I've searched these forums but could not find a thread for an HP with this chip with a corrupted bios.
I'm hoping someone take the DMI info from the dump and incorporate it into the latest bin file from HP please?
Comment