There is a problem with the laptop. The laptop was working just fine. When I replaced the original display(BOE NE173QHM-NY6 V8.0) with a new one(BOE NE173QHM-NY2 V8.0), it started making problems. It tried to start - the keyboard lighted from left to right and tried to turn on but the display was just black. I waited for 10-15 seconds and I turned it off from the power button. Then I replaced the display back again to the original one and tried turning it on but it just lights the keyboard up and immediately shuts down. Could the problem be because I didn't wait long enough for the BIOS to update and the DMI part of the BIOS got damaged? And if this is the case, is it restorable and how could i fix it? Thanks in advance!
-
-
----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.​
----------------------------------------------------------------------------------------------------------------------------------------------------------Doctrina est fructus dulcis, radicis amarae.. -
Re: Problem with Nitro AN517-41
I did remove it before changing the display.Comment
-
Re: Problem with Nitro AN517-41
Good for you, otherwise all kind of problems can happens.
In general, since the laptop was working properly before, changing the display alone should not cause any problems, especially since even the model and characteristics of the new and old screens are almost the same. And since the battery has been also disconnected as it should be at this procedure, there is no reasonable explanation of what is happening.----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.​
----------------------------------------------------------------------------------------------------------------------------------------------------------Doctrina est fructus dulcis, radicis amarae..Comment
-
Hello.
I need to repair this laptop which was bricked by the customer with custom mod bios or something and has no backup of course.
The laptop powers on without image.
Laptop Info:
ACER NITRO 5 AN517 N20C2 (AN517-41-R9S5)
Mobo: GH53Z LA-L031P
S/N: NHQBHEV00311218EAD3400
Thank you.Comment
-
I have ACER Nitro 5 model AN515-51 main board model LA-E911P Rev 1A after replacing the mainboard keyboard stop working properly.
Some keys not working like Q,Z,C and some keys show deferent chr$ if i press K i will get I press D for F4 key etc...
i have tried all software issues like drivers test the keyboard on Windows 10 and Windows 11 and Linux with same problem.
I have check the keyboard connector on the mainboard every thing looks ok.
Then i replaced the keyboard with new one ......same problem exact same keys problem.
I need your advice if anyone face... -
Hi,
I am currently working on a Nitro 5 laptop that came in with an issue involving the hinge and the LCD cable. The LCD cable has been replaced, and so has the screen. However, I am encountering a problem with getting the backlight to work.
While I am not an expert in this area, I suspect that PCH_BLK_PWM and BKOFF may be related to the backlight circuit. However, both of these components lead to integrated circuits (ICs), which makes it challenging for me to perform any checks.
Does anyone have any suggestions on where I should begin troubleshooting?... -
Hi all., can anyone help me get this ACER Nitro AN515-53-55H5 (Motherboard LA-F952P Rev: 1.0) keybaord working. I replaced it with another main motherboard as my previous one had the power section burnt. The new motherboard works & boots up finebut the keyboard does not work at all. I know that the laptop keyboard was 100% working with the older motherboard & when I installed this new one, it does not sense any keys. The ON/OFF button is on the keyboard & it works fine. The keyboard neither works in the BIOS setup or Windows 10. I use an external USB Keyboard & it is working fine... -
PC Specs:- CPU: Ryzen 5 1600
- GPU: GTX 1080 Palit JetStream
- MOBO: ASRock ab350 PRO4
- RAM: Crucial Ballistix Sport 2x8GB 3000MHz (XMP 2.0)
- PSU: XFX 650W (don't remember what model)
- OS SSD: ADATA SP920
- OS: Windows 10 21H2
Problem description:
Hi. I have a problem that has been going on for some time (2-3 years). It's hard to explain what it really is. Sometimes, my computer stops playing music, stops videos (starts buffering on youtube), there is no sound in games and when I minimize the game window and return to the game there is a black screen with window borders... -
Hey there,
So I got a problem with my LG OLED TV (OLED55B8PLA).
the problem is that the tv won‘t power on some times, the led stays red and won‘t even blink, just solid red when I try to turn it on. USB devices connected won‘t light up. 1/4 of the screen (left side) shows some green „clouds“ that are getting brighter everytime I turn the tv on and after some tries the tv finally turns on. Sometimes it takes 10 tries and some times 100 or even more tries.
When the tv is on, everything works fine, hdmi outputs, usb inputs, wifi, bluetooth, etc is working...
Comment