Announcement

Collapse
No announcement yet.

Problem with Nitro AN517-41

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Problem with Nitro AN517-41

    There is a problem with the laptop. The laptop was working just fine. When I replaced the original display(BOE NE173QHM-NY6 V8.0) with a new one(BOE NE173QHM-NY2 V8.0), it started making problems. It tried to start - the keyboard lighted from left to right and tried to turn on but the display was just black. I waited for 10-15 seconds and I turned it off from the power button. Then I replaced the display back again to the original one and tried turning it on but it just lights the keyboard up and immediately shuts down. Could the problem be because I didn't wait long enough for the BIOS to update and the DMI part of the BIOS got damaged? And if this is the case, is it restorable and how could i fix it? Thanks in advance!

    #2
    Re: Problem with Nitro AN517-41

    Originally posted by nick_rusev View Post
    There is a problem...
    Most probably you didn't disconnect the battery before playing with the screen (connector), did you?
    ----------------------------------------------------------------------------------------------------------------------------------------------------------
    All donations to Badcaps are welcome.
    Become a Badcaps supporter
    >>>>> click on this link to donate <<<<<
    Thanks to all supporters.​
    ----------------------------------------------------------------------------------------------------------------------------------------------------------
    Doctrina est fructus dulcis, radicis amarae.
    .

    Comment


      #3
      Re: Problem with Nitro AN517-41

      I did remove it before changing the display.

      Comment


        #4
        Re: Problem with Nitro AN517-41

        Originally posted by Vesko356 View Post
        Most probably you didn't disconnect the battery before playing with the screen (connector), did you?
        I did remove it before changing the display.

        Comment


          #5
          Re: Problem with Nitro AN517-41

          Originally posted by nick_rusev View Post
          I did remove it before changing the display.
          Good for you, otherwise all kind of problems can happens.
          In general, since the laptop was working properly before, changing the display alone should not cause any problems, especially since even the model and characteristics of the new and old screens are almost the same. And since the battery has been also disconnected as it should be at this procedure, there is no reasonable explanation of what is happening.
          ----------------------------------------------------------------------------------------------------------------------------------------------------------
          All donations to Badcaps are welcome.
          Become a Badcaps supporter
          >>>>> click on this link to donate <<<<<
          Thanks to all supporters.​
          ----------------------------------------------------------------------------------------------------------------------------------------------------------
          Doctrina est fructus dulcis, radicis amarae.
          .

          Comment


            #6
            Hello.

            I need to repair this laptop which was bricked by the customer with custom mod bios or something and has no backup of course.
            The laptop powers on without image.

            Laptop Info:
            ACER NITRO 5 AN517 N20C2 (AN517-41-R9S5)
            Mobo: GH53Z LA-L031P
            S/N: NHQBHEV00311218EAD3400

            Thank you.

            Comment


            • peste
              peste commented
              Editing a comment
              post merged..next time look for a thread with the name and model, motherboard model of the laptop, and post there, if you can't find it, then make a new thread..
          Working...
          X