HP 840 G6 Endpoint Security Controller reported on Boot Screen

[ridouane]

thank you very much my brother SMDFlea
for sharing information. I followed the instructions but it gives me the following message:

[SMDFlea]

https://www.badcaps.net/forum/troubl...security-error

[ridouane]

Hello,

Please help me with endpoint security controller problem

HP Elitebook 840 G6
SN : 5CG9442CPM
Product ID :4WG30AV

Thanks

[Ghamidi]

Hi,
I have a Laptop 840 g6 that has a Endpoint Security Controller Problem.
Can it be removed?
end late display 30s

try this file and Feedback please

[YOUNES MIH]

Clean the ME firmware https://www.badcaps.net/forum/troubl...22#post1622422

Endpoint Security Controller Problem.

[SMDFlea]

Hi,
I have a Laptop 840 g6 that has a Endpoint Security Controller Problem.
Can it be removed?
end late display 30s

Clean the ME firmware https://www.badcaps.net/forum/troubl...22#post1622422

[YOUNES MIH]

Hi,
I have a Laptop 840 g6 that has a Endpoint Security Controller Problem.
Can it be removed?
end late display 30s

[tbctr]

I solved it like this :
Install windows 10 and download HP BIOS config utility, navigate to the install folder via command prompt, run this:
BiosConfigUtility64.exe /setvalue:"Manufacturing Programming Mode","Lock" /verbose

[hoaca388]

I programmed both bios by writing the files here (840 g6.rar) . System is booting in Manufacturing Program Mode ...31
After entering the necessary information into the BIOS, I could not exit this mode.
At the next opening System is booting in Manufacturing Program Mode ...30 counting backwards.
What should I do to exit mpm mode?

Do you pay attention to the numbers ?

[tbctr]

Re: HP 840 G6 Endpoint Security Controller reported on Boot Screen

I solved the problem by program the files that I attach below. It was necessary to update the DMI in BIOS and the endpoint disappears for good. I would like to thank the colleague above for their willingness to help.

I programmed both bios by writing the files here (840 g6.rar) . System is booting in Manufacturing Program Mode ...31
After entering the necessary information into the BIOS, I could not exit this mode.
At the next opening System is booting in Manufacturing Program Mode ...30 counting backwards.
What should I do to exit mpm mode?

[SMDFlea]

HP Elitebook 840 G6
CRESCENT-6050A3022501-MB-A01(A1)
CT:PHWHA00WBD126S
Product ID:7JQ82UC#ABA
SN:2TK9490LCW

After updating the bios the laptop reboots and updates the bios cyclically. Cannot complete the bios update. I tried to flash the bios from another laptop and got Endpoint Security Controller problem reported on Boot Screen. Please help with fixed Bios. Original bios backup attached.

Fix endpoint with a hex editor and UEFITool or with a script.

https://www.badcaps.net/forum/troubl...security-error
https://www.badcaps.net/forum/troubl...post3310855

[GTX76]

HP Elitebook 840 G6
CRESCENT-6050A3022501-MB-A01(A1)
CT:PHWHA00WBD126S
Product ID:7JQ82UC#ABA
SN:2TK9490LCW

After updating the bios the laptop reboots and updates the bios cyclically. Cannot complete the bios update. I tried to flash the bios from another laptop and got Endpoint Security Controller problem reported on Boot Screen. Please help with fixed Bios. Original bios backup attached.

[SMDFlea]

https://www.badcaps.net/forum/troubl...21#post1622421

[Olivier Lim]

The file can only be flashed back using an SPI bios programmer.

Please i don't know how to that. Can you please explain or send me a tutorial i can use?

[SMDFlea]

Hello. didn't work, same problem after rebooting! flashed with usb using HP firmware update.

The file can only be flashed back using an SPI bios programmer.

[Olivier Lim]

Try this rebuilded BIOS and provide feedback:

Hello. didn't work, same problem after rebooting! flashed with usb using HP firmware update.

[Stefan Steff]

Hello,

Please help me with endpoint security controller problem

HP Elitebook 840 G6
SN : 5CG9398YVT
Product ID : 7WZ86UT#ABA

Thanks

Try this rebuilded BIOS and provide feedback:

[Olivier Lim]

Hello,

Please help me with endpoint security controller problem

HP Elitebook 840 G6
SN : 5CG9398YVT
Product ID : 7WZ86UT#ABA

Thanks

[woshidianpa]

Endpoint Security Controller

Thank you very much for your help, the problem has been solved

[hoaca388]

Hi,

I have a Laptop that has a Endpoint Security Controller Problem.
Can it be removed?

mb:6050A3022501-MB-A01
HP EliteBook 840 G6
Serial Number 5CG024188M
SKU Number 4WG26AV
Universally Unique Identifier (UUID)
5E1ACB53B764E31B9283E8FC1485A385
UUID (standard format)
53CB1A5E-64B7-1BE3-9283-E8FC1485A385
System Board CT Number
PHWHN00WBDU5KG
ME Firmware Version
12.0.94.2380
Feature Byte
3X476J6S6b7B7H7M7Q7W7m7saBaEapaqauawbUbhcAdUdpdqfAfPhKhkjhk8.BQ
Build ID
19WWCFBT601#SABE#DABE


This is my backup 32MB

Endpoint Security Controller