Hey guys, I updated HP G6-2000 series bios f25 to f27. Then laptop not recognise sata ssd as uefi. I load bios settings and tried every combination on bios settings but it didn't help. F25 version of bios was working on uefi but f27 bios says no boot device. Anybody did face such problem on HP laptops? What sould I do can I downgrade laptop bios?
-
-
Re: HP G6-2000 UEFI SATA didn't recognise after bios update
Assuming your drive is partitioned as GPT, probably something to do with secure boot. If your partitioning is MBR, then you need to enable Legacy/CSM etc. -
Re: HP G6-2000 UEFI SATA didn't recognise after bios update
I was using my laptop as UEFI before bios update so it was GPT partitioned.Originally posted by reformatt View PostComment
-
Re: HP G6-2000 UEFI SATA didn't recognise after bios update
Windows Boot Manager UEFI entry probably got deleted.OpenBoardView — https://github.com/OpenBoardView/OpenBoardViewComment
-
Re: HP G6-2000 UEFI SATA didn't recognise after bios update
Thank you mate. I couldn't try it because I reprogrammed chip to F25 version. But probably it was the cause.Originally posted by piernov View PostComment
Comment