I nedd some help to source a power choke . this is off a sony pcg-8112m
any help much appreciated
any help much appreciated
-
-
Re: need help to source part
I think it's a 1.5uH choke but lets wait for a second opinion.
.
1R5 = 1.5
L = Inductor
The 1 in 1R5 looks like an I because of that dot over it but I think that dot is a lame attempt at a logo and the characters in the string are separate.
Other string is a date code.
Just my take.
.Mann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
-
Re: need help to source part
The identifier (PL10) on the circuit board would tend to say it's an inductor. I'm less confident in the interpretation of the number on it.
Why do you feel it is bad?
PlainBillFor a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.
Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.Comment
-
Re: need help to source part
it looks burnt compared to the other chips on the boardComment
-
For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.
Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.Comment
-
Re: need help to source part
yes this is the strange thing i have checked the continuity .
power supply all ok . I have got 19v across the board .Comment
-
For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.
Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.Comment
-
Re: need help to source part
And if it ain't broke you can measure it to find out what it is..
Mann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
Comment
-
Re: need help to source part
thanks for your replies i will give more info about the board.
i bought this in as a bios update that had failed the customer had bought
a battery with a software to flash the bios so the battery would work on this machine. There is 19v around the board but no life when you press the power button not even a led flash . surely this bios update would not cause this problem alone.Comment
-
Re: need help to source part
Try to boot to the BIOS with it on AC power with the battery removed and all the drives out.
If it has more than one memory module then try both but with only one installed at a time.
.Mann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
Comment
-
Re: need help to source part
thanks for the info tried this and still no joy ,Comment
-
Re: need help to source part
Check the 19 vdc on the board for AC voltage riding on the DC.
If you got some the power brick is defective.Mann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
Comment
-
Re: need help to source part
Thanks for the replies . i have got another guy looking at this mainboard next week. i will let you know what the fault is . Thanks again for your help much appreciated.
SkyComment
Comment