Toshiba qosmio g40 -11d pci express error!!!!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • NConstantinou
    Badcaps Veteran
    • May 2017
    • 351
    • Cyprus
    #1

    Toshiba qosmio g40 -11d pci express error!!!!

    Dear all

    i have mobo FTUsy4 which at startup i get PCI EXPRESS ERROR.

    I CAN NOT login into the bios by pressing ESC or F1 or F2 key.
    Does anyone have any idea to bypass this message.

    Thanks
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • jean luc ferre
      upgrading windows7 to windows10 on an old laptop toshiba satellite m40 331 allways in error
      by jean luc ferre
      Hello,
      on this old laptop toshiba satellite m40 331 i am trying (but failing) to upgrade frow w7 to w10 and allways i have the error : 0xc1900101 - 0c20017. The upgrading process stops with the pc blocked with the logo screen w10 on the display; then there is no activity on the disk hdd or ssd.
      it's also impossible to boot from a dvd iso bootable, the device equally blocks on the w10 logo screen...
      i verified the informations in the device manager and it seems there are no problems...
      i wonder if it's not an issue about the bios (which is very old) or an interface problem...
      05-27-2025, 07:13 AM
    • Sus256
      HISENSE 65E7KQ PRO - no boot
      by Sus256
      Hi all!

      HISENSE 65E7KQ PRO
      RSAG7.820.13512 - chassis
      MT9618BAATAB - cpu
      RSAG7.820.12059 - power
      HD650Y3U77 - panel
      KLM8G1GETF - emmc

      The TV does not turn on, the standby indicator is on. All voltages are present.
      Emms is dead. Not readable, not detected.
      Replaced emmc.
      But with another dump there is no launch

      Terminal log

      UART
      <
      AC_ON
      RPMB key is not yet programmed

      HASH1_VERSION=0x00000000 64bit
      E-B
      FDE enabled
      layout pattern onebin by SAR7,0...
      06-01-2025, 02:11 AM
    • sushilachuthan
      APC UPS error P13
      by sushilachuthan
      one of our new (only 4 year old) 1KVA APC UPS stop working and through error P13 contact customer support.
      the equipment is out of warranty , upon investigation, we found the inverter board has the fault on the output hybrid relay circuit.
      The inverter output relay is parallel by SCR/Triac to enhance the relay performance or other means.
      We replaced the SCR with new device,, but the device is not power on as expected.

      Further research on the issue found that, the error P13 (event ID 107) is latched on the UPS nvram/MCU and need to clear/reset using a service procedure....
      09-26-2025, 09:00 AM
    • CornholioGSM
      RT809H - direct read Toshiba eMMC timeout error
      by CornholioGSM
      Hello all,
      help needed.
      I want to made backup of boot and all partitions from emmc desoldered from old phone.
      So i have wired emmc directly to RT809h - Dat0, GND,CMD, CLK, VCC, VCCQ - on programmer sw set Smart Identify to EMMC ISP and voltage to 3.3V.
      In Settings (N) i have set area to user, boot1,boot2 and EXT and vccq set to 1.8V (tested 3.3V too).

      Problem is, that i still get Read Timeout Error

      OK - emmc can be dead...so i have tested emmc wires connection to micro SD adapter and then in card reader and emmc was detected.

      So...
      01-16-2025, 04:34 PM
    • Document Archive
      Toshiba Qosmio X870 6050A2493501-MB-A02 Laptop Schematic
      by Document Archive
      Toshiba Qosmio X870 6050A2493501-MB-A02 Laptop Schematic
      HM76...
      11-01-2024, 06:47 AM
    • Loading...
    • No more items.
    Working...