Macbook A1534 emc 3099 820-00687-B dead after liquid

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • christian100
    Member
    • Aug 2021
    • 15
    • Germany

    #1

    Macbook A1534 emc 3099 820-00687-B dead after liquid

    Hallo Friends
    i had liquid damage on USB C Jack on Macbook A1534 emc 3099.
    The board numer is 820-00687-B. I think it is similar or same 820-00244.

    The motherboard locks very fine but the USB C Flex wire is damage so i have buy from Ali new wire.

    But the power Consumption on usb c is 20V and 0.7 Watt but the board is not starting.
    i measure 3.3 V and 8,5 on Battery connector without Battery.

    Is it possible to Test the Motherboard or start the Motherboard without Battery?
    because the Battery is damage i measure only 0V on Battery but on Battery connector without Battery i measure 8.5 V there is no short
    i will be glad for any Tips
    Thank you very much
    Christian
    Last edited by christian100; 10-17-2021, 05:31 PM.

Related Topics

Collapse

  • PenicheFix
    Macbook 12" - A1534 EMC 3099 - not charging battery
    by PenicheFix
    Hello to everybody, I'm new on the repair and in the world of electronics, so I have a MacBook 12" A1534 from 2017, that it's slow and not charging the battery, and in the system it says "battery assistance required" it starts only with the dc adapter.
    I have already the pdf file and boardview that other colleague from this community put online, but I don't now where to start. It's possible some guide lines? many thanks in advance.

    Voltage: 20.03v
    Amperage: 0.166 to 0.266A
    12-02-2022, 08:39 PM
  • mon2
    A1466 Macbook Air (Liquid damage repair)
    by mon2
    Hi. Recently serviced a damaged A1466 Macbook Air. Thought to post the issues and resolution for each.

    Macbook AIR Model A1466 Diagnostic 09-01-2021

    Issue: Liquid damaged (beer spill) Macbook AIR will not power up.


    Problems & Resolutions

    1) Attached Apple magsafe power adapter. No green / no orange light. This confirms the absence of the PP3V42_G3H voltage rail. The PP3V42_G3H rail is the primary voltage rail necessary to communicate with the magsafe power adapter to report the green or orange light status to the end user....
    09-01-2021, 09:31 AM
  • mitchw
    MacBook Pro 16 M1 Pro Liquid Damage (820-02100)
    by mitchw
    Got a MacBook Pro M1 Pro 16'' to rescue immediately after liquid accident - I got it in less than 30 minutes after the spill.
    It got spilled from behind when the laptop was closed. It mostly affected the rear of the mainboard and the bottom of the LCD.

    I quickly took it apart and washed the liquid residue off the mainboard.
    The area around the UP800 had some light corrosion, but it just washed away with some IPA. Other areas looked undamaged.

    The mainboard got a thorough cleaning, as did the top case and LCD connectors / cables.

    Now the laptop...
    07-16-2025, 07:55 AM
  • stefanbs
    Fit 820-00244-А board in Apple Macbook A1534 2017 820-00687-А
    by stefanbs
    The laptop is Apple Macbook A1534 2017 with board 820-00687-А. The USB-C tester shows no voltage, there is 820-00244-А board available. I looked at both schematics, all connector signals seem to be the same. Did someone try to fit 820-00244-А board in A1534 2017?
    05-11-2025, 01:08 AM
  • obelix24
    Macbook A1534 820-00244 - 5V 0,2A
    by obelix24
    Hi All,

    i got one Macbook a1534 boardnumber 820-00244 that is taking only 5V 0,2A

    I've tried to replace 3x CD3215B01 chip but it's still behaving same ....

    On the board there was blown L4804 so i've replaced it.
    when power is connected 5V 0,2A
    PPBUS_G3H - 0V
    PP20V_USBC_XA_VBUS_F - 5V

    I've tried to remove F7040 as mentioned here
    https://www.badcaps.net/forum/troubl...1534-820-00244

    but there is...
    04-29-2024, 07:48 AM
  • Loading...
  • No more items.
Working...