Macbook Touch Bar Stuck on the update error message

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mnciks11
    Badcaps Veteran
    • Aug 2019
    • 345
    • south Africa
    #1

    Macbook Touch Bar Stuck on the update error message

    Hello Guys

    I need your help with a macbook touchbar stuck on the update

    "a critical software update is required for your mac. connect to a network to install this update"

    Im getting the above error and i can not continue at all, it keeps on going back there, i reinstalled iOS, I did the updates, but still looping back on that same error message

    Please assist me guys im stuck now

    Thank you
    Attached Files
    Tags: None
    • piernov
      Super Moderator
      • Jan 2016
      • 4439
      • France
      #2
      Re: Macbook Touch Bar Stuck on the update error message

      https://logi.wiki/index.php/Critical...roubleshooting
      OpenBoardView — https://github.com/OpenBoardView/OpenBoardView

        Comment

        • mnciks11
          Badcaps Veteran
          • Aug 2019
          • 345
          • south Africa
          #3
          Re: Macbook Touch Bar Stuck on the update error message

          Originally posted by piernov
          https://logi.wiki/index.php/Critical...roubleshooting
          Thank you so much I'll do my best and update you guys on what worked for me

            Comment

            • monitron
              Apple veteran.
              • May 2014
              • 38
              • Holland
              #4
              Re: Macbook Touch Bar Stuck on the update error message

              You can also try the Apple configurator 2 tool but you need a second macbook for that. Beware that if you do a recovery, all data will be lost.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Bmet
                  MacBook Pro 13 inch A2238 M2 stuck on 5V
                  by Bmet
                  Hi,

                  I have a MacBook Pro 13 inch A2238 M2 and it was stuck 5V with 0 amps. I measured some important lines and I found a short on PP3V8_AON_MPMU_ISNS_VIN, I tried injecting 1v and I saw heat coming from the mPMU so I removed the pmu thinking that was the problem. I don't know why I didn't check the other side of the border but there it was, a shorted cap. I replaced the cap and the short was gone, so I reballed the PMU and put it on again but voltage was still stuck at 5V and the current was fluctuating between 0 and 0.45 amps. I checked under the thermal camera and I saw the mPM...
                  04-02-2025, 05:02 PM
                • modtool
                  Macbook Pro A2289 EMC 3456, MLB 820-1987-A, broken U6903, stuck at 5v
                  by modtool
                  Dear friends,
                  a close friend of mine gave me this machine, she told me that the last days the fan was going high and that it was heating up too much for the usual things, and that suddenly one morning it didn't start anymore .
                  I opened it and inspected carefully with a high magnifying lens, found no oxydized spots but a short on PPBUS_G3H , then a blown U6903.
                  I changed U6903 with a new one, PPBUS_G3H became 558 (measuring with red probe to gnd , and black on F7000) , PP3V3_G3H_RTC 463.
                  Now when I plug the usbc cable (original Apple 61W power supply), nothing starts automatically,...
                  10-25-2025, 05:09 AM
                • MyronViegas
                  MacBook Pro 2018 A1989 820-00850-A Stuck at 5.00V and 0.150A
                  by MyronViegas
                  Hey guys,

                  I got a MacBook Pro a1989 820-00850-A dead for repair. The MacBook itself was off for a month or so and it didn't power on. I tested using ammeter and it was stuck on 5v. Opened the machine and found a short on ppbus_g3h, corrosion near the right spkr_amp. removed the spkr_amp and saw short on ppbus_g3h. plugged in to power, boosted to 20v .600A and then back down to .300A. Trackpad was clicking when on .600A but no image etc.

                  Later, I tried again but it dropped down to 5v and never boosted back to 20V. checked board again and found ppbus_g3h shorted again....
                  10-06-2025, 08:45 AM
                • Steven Pieter
                  Macbook Pro A1706 820-00923-05 Stuck At 5V 0.03A
                  by Steven Pieter
                  hello everyone, let me ask, I have a macbook which is stuck at 5v and 0.03 A when tested with a usb tester. Previously I wanted to replace the screen on the device, but by accident I forgot to unplug the battery. This caused the MacBook to get stuck at 5v, previously I had replaced the CD3215 (U3100) IC because it was warm. After I replaced it the problem was still not resolved. Please guide. Thank you
                  11-24-2024, 10:02 AM
                • defdjamel
                  macbook pro 16" m2 pro- A2780 - 820-02890 stuck at 5v - 0A
                  by defdjamel
                  macbook pro 16" m2 pro- A2780 - 820-02890 stuck at 5v - 0A on all usb port and magsafe.
                  all voltage:

                  PPBUS_AON = 0V , diode : 0,4
                  PP3V3_AON = 0V
                  PPVIN_P3V8AON 0V
                  PPDCIN_AON_CHGR = 5V
                  PPVBAT_AON_CHGR_REG = 0V
                  so U5200 not do the job
                  on u5200 :
                  PP5V_CHGR_SW = 4.5 v
                  CHRG_GATE_Q1 = 0V
                  1V8_SDA = 0V
                  ​1V8_SDC = 0V
                  ​
                  i check u5200 diode on PHASE and LX pin -> 0.4
                  i don't understand something ,
                  sda and scl in u5200 are pulup by 1V8_S2 ( 0V)
                  so can not communicate .
                  1V8_S2 are...
                  09-03-2025, 07:11 AM
                • Loading...
                • No more items.
                Working...