Announcement

Collapse
No announcement yet.

HP Envy x360 15-w237cl Help!! Need to replace a blown component

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    HP Envy x360 15-w237cl Help!! Need to replace a blown component

    Hi All,

    Was trying to clean the dust and while replacing the component in the attach pic burnt out and smoked.
    The laptop model is HP Envy x360 15-w237cl.

    End goal is to replace it with the same part or an equivalent. Would appreciate any help or advice towards that goal.

    I've tried to google for this laptop model number and the component ID U52202 (See pic), but nothing shows up.

    Pic of the burnt component:
    https://ibb.co/jWrWmxg
    The print says HC6MB (to the best of my ability to read)

    Pic of the MB Part number:
    https://ibb.co/bFmk4CR

    Pic of the replacement part number:
    https://ibb.co/M91wfFC

    Thank you for all/any help!

    Joe.
    Attached Files
    Last edited by SMDFlea; 04-02-2021, 10:10 AM.
    Tags: None
    #2
    Re: Help!! Need to replace a blown component and can't identify the part!

    It might be a SY6288C6AAC

    Comment

      #3
      Re: Help!! Need to replace a blown component and can't identify the part!

      Thank you so much!

      I found a video that referred to that specific component (https://www.youtube.com/watch?v=QE4wuuVD06I), but the laptop model was different. Also, the technician in the video couldn't conclusively determine why that component blew out so frequently.

      Should I just try it out? and if it's the wrong component, could it cause further irreparable damage?

      Comment

        #4
        Re: Help!! Need to replace a blown component and can't identify the part!

        The motherboard is this:
        Laduree-Sky
        14263-2
        448.06202.0021

        Comment

          #5
          Re: Help!! Need to replace a blown component and can't identify the part!

          his component was HC6LA and your is HC6MB so it can be same part.

          as his laptop was Spectre x360 and your is Envy x360. i think it is the same component

          Comment

            #6
            Re: Help!! Need to replace a blown component and can't identify the part!

            Originally posted by ktmmotocross View Post
            his component was HC6LA and your is HC6MB so it can be same part.

            as his laptop was Spectre x360 and your is Envy x360. i think it is the same component
            I agree with you and R_J ,seems right.

            https://www.ebay.co.uk/itm/164393467374

            HC7YA HC6 HC SOT23-5 .The part number is HC***

            .
            Last edited by SMDFlea; 04-02-2021, 10:41 AM.
            All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

            Comment

              #7
              Re: Help!! Need to replace a blown component and can't identify the part!

              Thank you for your help! I will look up that number. There was a suggestion that it could be a slightly different part number, based on the following circuit diagram. Do you think it's the same as what you're mentioning? I'm not an electronics engineer, so am having a hard time tracking down this part.
              https://ibb.co/Dfysc82
              Attached Files
              Last edited by SMDFlea; 04-02-2021, 09:37 AM.

              Comment

                #8
                Re: Help!! Need to replace a blown component and can't identify the part!

                The motherboard makers can use different suppliers for pin to pin compatible parts.
                See the attached screenshot from a SY6288C6AAC (Wistron Husk Petra -4M Schematic) ,pin 4 is NC not connected, there is no copper trace between 4 and 5.There`s no datasheet for the silergy part. If the richtek part doesnt work with just pin 5 as Vin you could solder pins 4 and 5 together

                https://cdn.badcaps-static.com/pdfs/...59b8da413a.pdf
                Attached Files
                Last edited by SMDFlea; 04-02-2021, 10:06 AM.
                All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

                Comment

                  #9
                  Re: Help!! Need to replace a blown component and can't identify the part!

                  Originally posted by eskimojo47 View Post
                  Hi All,

                  Was trying to clean the dust and while replacing the component in the attach pic burnt out and smoked.
                  The laptop model is HP Envy x360 15-w237cl.

                  End goal is to replace it with the same part or an equivalent. Would appreciate any help or advice towards that goal.

                  I've tried to google for this laptop model number and the component ID U52202 (See pic), but nothing shows up.

                  Pic of the burnt component:
                  https://ibb.co/jWrWmxg
                  The print says HC6MB (to the best of my ability to read)

                  Pic of the MB Part number:
                  https://ibb.co/bFmk4CR

                  Pic of the replacement part number:
                  https://ibb.co/M91wfFC

                  Thank you for all/any help!

                  Joe.
                  ----------
                  Hi there, I too have a blown chip on my board, can I add picture here, if not, how do I make a new post? I'm new in the forum, thanks.

                  Comment

                    #10
                    Re: Help!! Need to replace a blown component and can't identify the part!

                    Yes. At the bottom of the text editor should be a box that reads "Attach files". Select it to proceed. See attached.
                    Attached Files

                    Comment

                      #11
                      Re: Help!! Need to replace a blown component and can't identify the part!

                      Originally posted by eskimojo47 View Post
                      Thank you for your help! I will look up that number. There was a suggestion that it could be a slightly different part number, based on the following circuit diagram. Do you think it's the same as what you're mentioning? I'm not an electronics engineer, so am having a hard time tracking down this part.
                      https://ibb.co/Dfysc82
                      before replacing component removeburned and check forshort. regulator dont burn itself

                      Comment

                        #12
                        Re: Help!! Need to replace a blown component and can't identify the part!

                        Originally posted by ktmmotocross View Post
                        before replacing component removeburned and check forshort. regulator dont burn itself
                        Sounds great, I will check for grounds first, good idea.
                        Here's a photo of the chip U3501, need to I.D. the exact part please.
                        Attached Files

                        Comment

                          #13
                          Re: Help!! Need to replace a blown component and can't identify the part!

                          Originally posted by mon2 View Post
                          Yes. At the bottom of the text editor should be a box that reads "Attach files". Select it to proceed. See attached.
                          Hi again, wondering how to, make a new post, since I am not getting any replies on my last entry.

                          Please send me a note to get my new post going, thanks, Michel.

                          Comment

                          Previous template Next
                          Working...
                          X