when i remove bios ic i have all voltages on board (3.3,5 and voltages on bios pins except pin numer one) and when i put it backk all of em are gone
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
Asus N53sv not powering on
Collapse
X
-
Re: Asus N53sv not powering on
Originally posted by SMDFlea View PostThe problem could be with the PCH or EC.Checck by removing R2837,then check voltage on bios pin 1. SL2802 pin 1 goes to pin 101 on the EC through R3050
i did that already and nothing happend in the end i changed pch and ec on the board and still the same at somepoint i changed charge ic bq24740 and then i had low voltage o pin 8 with bios chip on board and my pwm was getting hot i changed that too and chkd mosfets and didnt find solution. i was hoping fixing this one cuz i was couros why this is happening
but the costumer is in a rush so i have to let it go
Comment
Comment