N551JM MB (G551JM) ram slot

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Prosatanosz
    Senior Member
    • Nov 2015
    • 108
    • Hungary
    #1

    N551JM MB (G551JM) ram slot

    Hi!

    One of the ram slot not working. The second is loading os but sometimes BSOD. What can be the cause? Cpu, or cpu BGA fault? Worth time wasting for investigate? And how?

    There in no damage or other trivial things. Rams ok.
    Last edited by Prosatanosz; 10-02-2019, 03:47 AM.
    Tags: None
    • mcplslg123
      Badcaps Legend
      • Jun 2015
      • 7262
      • india
      #2
      Re: N551JM MB (G551JM) ram slot

      Did you mildly heated the ram slot with good quality bga flux assuming you have already cleaned the slots. Sometimes, it does work.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • totoagung2
          by totoagung2
          Totoagung2: Situs Slot Gacor Paling Gampang Jackpot di Indonesia 2024


          Hadirnya situs slot gacor gampang jackpot Totoagung2 yang menyediakan banyak sekali permainan slot terpopuler terkini yang hadir setiap tahun nya. Tentunya di Indonesia sendiri yang menjadi salah satu negara yang favorit bagi provider game slot. Banyak sekali pengembang permainan melihat negara tanah air Indonesia untuk menjadikan dan mencoba berbagai kesempatan bisnis judi online yakni games judi slot Totoagung2 terbaik dan terpercaya no 1. Hal itu juga dibuktikan dengan sangat banyaknya provider mesin slot...
          01-01-2024, 02:43 PM
        • Lifeisfun
          Trying to troubleshoot DDR4 SODIMM slot with slot tester
          by Lifeisfun
          Hi folks!
          I have some kind of memory problem on Lenovo laptop. I was initially able to install windows after several tries since the laptop did freeze in middle of those attempts.
          Eventually I discovered that it was related to moving the laptop.
          Later on it even stopped booting unless I pressed around the memory slot. (no keyboard LEDs only power button responds)
          If I remove the RAM I get the beeps that RAM is missing. Inserting the RAM there is silence and it will not boot most of the time. No picture.

          I removed the board got one of those memory slot testers...
          06-04-2025, 02:26 PM
        • szepesif
          Lenovo Ideapad 3 15IIL05 working perfectly with onboard RAM but it doesn't start when I add a memory into the RAM slot
          by szepesif
          Hey guys!

          I don't know the solution to this problem, but this is definitely not unique and I would like to figure out the solution to fix these in the future.

          I have two identical Lenovo Ideapad 3 15IIL05 laptops with integrated 4GB DDR4 memory. Both work perfectly with that. BUT... if I add any extra memory to the single RAM slot, it never gives a picture. I thought the RAM slot pins would be the problem but no, all pins are solid (I checked them under the microscope). The RAM in the slot has 1.2V, so the voltage is present on the module. I flashed the latest BIOS, so
          ...
          04-19-2025, 10:18 PM
        • Byte_76
          Faulty memory slot on Tekram Slot 1 motherboard
          by Byte_76
          I have a Tekram P6PRO-A5 Rev. 1.01 which has an issue with one of the memory slots and with the floppy port.

          When a memory module is installed into the slot which is closest to the north bridge, the board will beep and won't post. The same memory module works in the two remaining slots.

          Also, the floppy drive does not work regardless of bios settings.

          Please help me to identify the possible cause of the faulty memory slot and the floppy drive port as well.

          I have examined the board under my digital microscope and did not find any broken traces....
          2 Photos
          04-12-2025, 06:58 AM
        • stormanimal83
          Gigabyte B450 Aorus Pro stuck at VGA LED, burning hot LED Controller MCU 1 under PCI slot...
          by stormanimal83
          Hey....

          Board as written in description was stuck at VGA LED. common Problem wit these type of bords.... tried all the "standard stuff" like resettin... reseatin.... found out the LED Controller MCU1 = IT8295FN-56A geting burning hot under the last PCI Slot.. now i desoldered it cause there were only 18 ohms at the caps arround.... another aorus x470 in working condition with similar part and nearly same layout had arround 280 ohms...

          my question is: why doesnt the board start know without this chip.... worked myself through the boardview but i can´t understand...
          01-18-2024, 02:15 PM
        • Loading...
        • No more items.
        Working...