The story starts like this...i got this laptop in bad shape, broken...found out that it was missing like 10 capacitors on motherboard (on ac_but_sys and vcggt net)..and capacitors were not removed but pulled by force from the board.
I didnt have the same motherboard boardview but i got boardview for similar asus gl553vd...so i replaced all the missing capacitors according to that baordview.
and here is the problem, now laptop starts, everything is fine but...if i run it with adapter there is no problem. if i run it with adapter with battery in laptop, also there is no problem...battery is charging...everything seems ok. if i remove power adapter while the laptop is working everything is fine...if i restart the laptop (with battery only) everything is fine...But if i shutt it down and try to power it with only battery in laptop the motherboard shows only first light (on) no other lights and there is nothing on the screen, no sounds...I have to hit power button again for 4 seconds to shutt it down.
So i meassure the voltages on the ac_but_sys while the power adapter is on and it shows 16,37v...but without adapter (with battery only) it goes to 15.92 v...I removed the battery and tested it alone and i get 15.92 v....
So what do you think?
I didnt have the same motherboard boardview but i got boardview for similar asus gl553vd...so i replaced all the missing capacitors according to that baordview.
and here is the problem, now laptop starts, everything is fine but...if i run it with adapter there is no problem. if i run it with adapter with battery in laptop, also there is no problem...battery is charging...everything seems ok. if i remove power adapter while the laptop is working everything is fine...if i restart the laptop (with battery only) everything is fine...But if i shutt it down and try to power it with only battery in laptop the motherboard shows only first light (on) no other lights and there is nothing on the screen, no sounds...I have to hit power button again for 4 seconds to shutt it down.
So i meassure the voltages on the ac_but_sys while the power adapter is on and it shows 16,37v...but without adapter (with battery only) it goes to 15.92 v...I removed the battery and tested it alone and i get 15.92 v....
So what do you think?
Comment