dv6 3120us blank screen f11 f12 red led

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • hienton2
    Senior Member
    • Sep 2009
    • 183

    #1

    dv6 3120us blank screen f11 f12 red led

    My dv6 3120us ,turn on, has blank screen f11 f12 red led, cap lock sometime on somtimes
    not. no blink,.

    Anybody help Please why f11 is on ? I doubt the gpu is bad?

    Good day Thanks
    Last edited by hienton2; 12-22-2017, 02:55 PM.
  • piernov
    Super Moderator
    • Jan 2016
    • 4435
    • France

    #2
    Re: dv6 3120us blank screen f11 f12 red led

    RS880M northbridge, can go bad. Try to mildy heat heat for a couple of minutes at 200°C to see if it comes back to life. Make sure you don't overheat it, and this will only be a very temporary fix, the northbridge will need to be replaced.
    Also I assume you tried with known good ram sticks and cleaned the RAM slots first.
    OpenBoardView — https://github.com/OpenBoardView/OpenBoardView

    Comment

    • hienton2
      Senior Member
      • Sep 2009
      • 183

      #3
      Re: dv6 3120us blank screen f11 f12 red led

      Thank you Piernov

      I will reflow northbridge and clean ram slot.

      MY question Did my laptop complete booting ? Or on half way ? Only the picture is the problem?

      Comment

      Related Topics

      Collapse

      • Ryan.man
        Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
        by Ryan.man
        Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

        My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

        This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
        02-04-2025, 12:23 PM
      • Chrissygizmo
        Panasonic TX-48CX350B backlights but white screen , blank screen
        by Chrissygizmo
        Hi all, I’ve got a problem I hope someone can help me fixi.
        I have a Panasonic TX-48CX350B tv , it powers up ok but the screen is blank, the backlights are working, there’s nothing else though, no picture or sound. I’m not sure what the fault is called whether it’s BLANK/ BLACK/ or WHITE SCREEN I’ve actually came across this before on a similar tv but just ended up scrapping it, I will upload pictures of the boards etc , if anyone could help me I would really appreciate it...
        01-11-2025, 03:18 PM
      • dicky96
        HP Elitebook Screen blank - backlights but no image
        by dicky96
        Hi guys
        I'm trying to fix this laptop screen

        Basically the owner is a computer shop and they brought it to me with two screens. They said the repair shop they use could not fix it, so I thought i would try to see if I am better than their current repairer!

        OK so I have the original screen which works but has lines across the bottom quarter of the screen

        I have the replacement screen, which they fitted and it worked. They then put the laptop on one side for a couple of weeks until they found a buyer. When they showed it to the buyer, the screen would...
        04-28-2021, 07:30 AM
      • Kalman27
        Lenovo IdeaPad Slim 5 14IAH8 - Type 83BF OLED Blank screen
        by Kalman27
        We have a Lenovo IdeaPad Slim 5 14IAH8 - Type 83BF for repair. The original issue the OLED screen is blank.

        We have replaced the OLED screen with the exact model, also we replaced the LCD cable, but no luck.

        I think there is something with the motherboard. I don't really have experience with OLED screens so far, so not sure how it should work. I have seen some laptop comes with a separate controller board, but this model does not.

        Also, there is an error in Windows device manager - This device cannot start (Code 10) - Intel(R) Serial IO I2C Host Controller...
        06-17-2025, 05:52 AM
      • smic717394
        iphone XS turns off when press on screen.
        by smic717394
        Hi,

        I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
        07-25-2024, 10:16 AM
      • Loading...
      • No more items.
      Working...