LGG2 LS980 Cell I am searching for Capacitor Value

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • A1toadstool
    Member
    • Mar 2015
    • 12
    • USA

    #1

    LGG2 LS980 Cell I am searching for Capacitor Value

    I have a LG G2 Sprint Phone (LS980) and it has recently decided to let a capacitor (I'm 80% positive) break loose from the solder and disapear the last time it was dropped. I repaired the glass but now I can only talk using speaker phone.
    The component in question is under the back cover and the daughterboard (smaller bottom board) cover right next to the audio jack input. it is the 3rd part from the bottom the first two are right next to eac other then a little gap until the third and another gap until the 4th component on the edge of theaudio input jack.
    See Attachment for exact location.
    I thank you in advance if anybody has an old one laying around or access to the information directly. I have looked over ther service manual but could not get a description of the part. It only goes into so much detail then says replace board.
    Attached Files
    Last edited by A1toadstool; 07-25-2016, 12:46 PM. Reason: spelling error
  • A1toadstool
    Member
    • Mar 2015
    • 12
    • USA

    #2
    Re: LGG2 LS980 Cell I am searching for Capacitor Value

    LGG2 LS980 Cell I am searching for Capacitor Value
    I have a LG G2 Sprint Phone (LS980) and it has recently decided to let a capacitor (I'm 80% positive) break loose from the solder and disapear the last time it was dropped. I repaired the glass but now I can only talk using speaker phone.
    The component in question is under the back cover and the daughterboard (smaller bottom board) cover right next to the audio jack input. it is the 3rd part from the bottom the first two are right next to eac other then a little gap until the third and another gap until the 4th component on the edge of theaudio input jack.
    See Attachment for exact location.
    I thank you in advance if anybody has an old one laying around or access to the information directly. I have looked over ther service manual but could not get a description of the part. It only goes into so much detail then says replace board.
    Attached Files

    Comment

    Related Topics

    Collapse

    • SluggerB
      Help with trying to fix phone that is not charging (Pics inside)
      by SluggerB
      I have two TCL A30 phones.

      Old Phone: This phone worked fine for years, then stopped charging If you plugged a charger into it, the phone would make the charging sound, the phone would tell you it is charging, but the battery icon would not have the charging symbol in it and the battery would not charge.I tried new battery, same behavior.

      New Phone: Works fine, bought as a donor board to try and repair Old Phone

      My interest here is to repair Old Phone, using components parts off New Phone if needed. I am not interested in replacing Old Phone with New Phone....
      08-12-2024, 08:11 AM
    • keeney123
      new OS on a Sonim XP5s phone
      by keeney123
      To you programmers out there I want to know if it is possible to put a new OS on the Sonim XP5s phone? I only need this phone to make calls, receive calls, have a list of contacts and be able to call voice mail.
      I bought this phone new Sep.2021 as an unlock phone from a third-party seller. The phone worked fine until Jan 2022. I then had intermittent problems with the sound setting resetting itself. One of the settings, outdoor, would go to silent all by itself. When in silent mode it does not indicate a call has come in. I missed very important phone calls. All the other setting in sound...
      05-13-2022, 07:19 PM
    • Prolog
      RTX 3080 FE Identifying capacitor
      by Prolog
      Hi people, I hope this is the correct spot to post this, I'm new to the forum.

      I have an RTX 3080 Founders Edition which has a burnt up capacitor (it was in parallel with another capacitor which appears damaged too), so I am hoping to be able to identify the capacitor values and order replacements.

      I hope these photos make it clear which component I am referring to:
      (yes, the soldering is a bit botched from removing the blown one, I know)

      I have found the board schematic (attached), but there does not seem to be a boardview available. I have never...
      12-01-2024, 08:27 PM
    • chth96
      If I replace with inferior capacitor, Is it No harm to other IC components at all?
      by chth96
      I replaced some capacitor which is located on optical pickup pcb which is shown in the table below(PCB #2).Because it have been out of order.
      Now,It works very well,But I just have found that all caps (6svpc100my and other part number as well) ,which is shown in the table below, has ultra-high ripple current spec.
      It is not able to obtain any capacitor which can be a substitute for this ultra-high ripple current nichicon capacitor.
      So I replaced it with samxon and rubycon's general capacitor(GP,YXA series).
      I know that these capacitor will not last as long as nichicon capacitor...
      12-22-2023, 04:34 AM
    • chth96
      How can I test non-polarized capacitor?
      by chth96
      I desoldered samwha NF capacitor(50v 5.6uf) from PCB circuit of 29inch CRT TV which have symptoms of no display after I heard sound of inrush of current to TV whenever I switch on this television.
      I measured ESR value of this non-polarized capacitor(samwha NF capacitor 50v 5.6uf) by means of MESR-100 ESR meter and It displayed 0.3 ohm

      And When I measured its capacitance with digital multimeter and LCR-T4 Mega328 meter, It displayed 10uf from DMM and 8uf from LCR-T4 meter.
      I found catalogue of samwha capacitor(samwha-catalogue_3.pdf file), which is attached to this thread,...
      06-02-2024, 07:31 PM
    • Loading...
    • No more items.
    Working...