hey guys , serious problem ,need your help

[highpulse]

got this l850 on my desk , with issues on kbc and with regulator , while replacing regulator , 2 components disapear and outher 2 changed position , since im not sure

here is a photo , i added red traces were i need to know values .

th in advance , alltough dont forget this is on UMA board

PLF PLR CSF CSR UMA

[bicalov]

Re: hey guys , serious problem ,need your help

In the schematics they list C850, C855, L850, L855 together
Maybe this is for the boardview file C850, C855 the same, because the folder from the boardview shows also C850, C855, L850, L855.

Hope you can use it, it's not uma but it might give an impression

You also can try the datasheet from the chip. Mostly they give a basic application schematic where you can see the values.

[rs232killer]

Re: hey guys , serious problem ,need your help

Hi
i have spare mbs that you can use components, stop by

ps. you know that you have a knob that reduce air flow right trolling

[highpulse]

Re: hey guys , serious problem ,need your help

lol , obviously filipe , but the problem was doing to much things at same time , and i was not paying the attention i should , hot air is always with same speed FAST
i will ask luis to pass by to see the mbr , btw the mbr is the one who have the 1225c right beneat the PCH

[rs232killer]

Re: hey guys , serious problem ,need your help

hi
its exactly the same as yours and you can rip components out

[highpulse]

Re: hey guys , serious problem ,need your help

thk mate