Announcement

Collapse
No announcement yet.

Do coils really get hot?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Do coils really get hot?

    I was wondering if coils around processor really get very hot? I was checking a defective board and tried to power it up, I notice 3 coils are getting very hot while its ON.

    #2
    Re: Do coils really get hot?

    yes, some laptops have cooling pads for it, but replace processor to be sure

    Comment


      #3
      Re: Do coils really get hot?

      Initially the laptop got an i5 processor but whenever I power the machine up it turns off after 3 seconds. I've got and i3 with same series so I tried it out. it takes a little longer before it turns off. I checked everything around the processor and none is shorted. Here is the schematic. On page 33, PL19 and PL18 is getting very hot.

      At first I suspected PU6 is shorted but its not. Does not get hot too. board does not turn off when I run it without processor. So there's something wrong with cpu supply.

      Comment


        #4
        Re: Do coils really get hot?

        where is the file?
        Just cook it! It's already broken.

        Comment


          #5
          Re: Do coils really get hot?

          Originally posted by lezsimply View Post
          Initially the laptop got an i5 processor but whenever I power the machine up it turns off after 3 seconds. I've got and i3 with same series so I tried it out. it takes a little longer before it turns off. I checked everything around the processor and none is shorted. Here is the schematic. On page 33, PL19 and PL18 is getting very hot.

          At first I suspected PU6 is shorted but its not. Does not get hot too. board does not turn off when I run it without processor. So there's something wrong with cpu supply.
          take Pu6 down and resolder it!
          if that is the Cpu`s supply
          Just cook it! It's already broken.

          Comment


            #6
            Re: Do coils really get hot?

            oh sorry dj forgot to attach schematic here it is
            Attached Files

            Comment

            Working...
            X