Can somebody tell me what this part is ?

[Richi_el]

Hi,

Can somebody tell me hat this part is ? And what are the Spec's
of it?

Its in the near of the inverter connector and its written 252 H on it ...
It looks like some metall plates wich are stappled over.

[Richi_el]

Re: Can somebody tell me what this part is ?

This part

[Richi_el]

Re: Can somebody tell me what this part is ?

Bigger

[khaahk]

Re: Can somebody tell me what this part is ?

resettable fuse, how many amps, do not know. Depends on circuit...

[Richi_el]

Re: Can somebody tell me what this part is ?

thanks for reply
but am i right when i make a bridge over it it should work ?
, but i does not ..

the device make a short when i make the bridge..

without the fuse the device work also fine , but we the backlight of LCD isnt starting..

[Richi_el]

Re: Can somebody tell me what this part is ?

and pls can somebody explain me how can i find it out how many amp it has ?

[khaahk]

Re: Can somebody tell me what this part is ?

Resolve the short after the fuse and then start to think how many amps it should be. If it is 19V inverter power then 1 amp should be ok.

[highpulse]

Re: Can somebody tell me what this part is ?

make maths , calculate power needed by screen , more or less then use this math calculation a=p/v

P =watts
V=19 volts if its for the panel (attention if its led , the backlight is not 19volts)
a= will be the amp in the circuit , like this you can calculate more or less the amp that will pass on the circuit , then you will know wich is the best fuse for that circuit part.

[cyberhack]

Re: Can somebody tell me what this part is ?

2.5 amps have a look at this page 2
https://cdn.badcaps-static.com/pdfs/...7263e74802.pdf

[Richi_el]

Re: Can somebody tell me what this part is ?

many thanks for support i will reply the result tommorow evning ...
on this fuse i have a incoming voltage of 13V .....