MacBook Pro A2141 (820-01700-A) Not turning on, drawing 0.088-0.04A at 20V

Tend0

E.E.C.S

Join Date: Oct 2021

Posts: 93

Country: Burkina Faso
#1

MacBook Pro A2141 (820-01700-A) Not turning on, drawing 0.088-0.04A at 20V

Yesterday, 06:29 PM

Diagnostic Steps:
I try DFU Revive and Restor got error [AMRestoreErrorDomain – 0xA (10)]
find a short to ground on PP2v5_NAND_SSD_1 Resistance is 21ohm
PP1v8_SSD1 resistance is 2.7 ohm
PP0v9_SSD1 resistor is 305ohm

i think NAND_SSD_1 fail

Before doing anything, I need expert advice on how to get the computer working again thanks for support
Tags: None

Previous template Next

Macbook Pro 16" A2141 screen artefacts, kernel panic

by sofles

Hi there.

I have Macbook Pro 16" 2019, model number A2141, motherboard number 820-01700. I have some problem with dedicated graphic card. When Macbook switches to dedicated GPU it is getting instantly hot and starts to show glitches on screen, then it freezes (trackpad is not clicking anymore) and shuts down.
I tried to reinstall MacOS But it was a pain, it started to show glitches in middle of installation and I could not finish it. I only was able to reinstall MacOS when I put Macbook outside (it is winter and -2 Celcius).

Now situation looks like this, If...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
02-05-2025, 05:05 AM
MacBook Pro A2141 820-01700 - stuck in 5v drawing 420ma

by survivalbloke

This laptop is stuck at 5v(all four ports checked) and exactly 420ma current draw. I checked PPBUS_G3H @ F7000 P2, and get ~8.76v where I should have 12.60v-12.65v. I checked resistance to ground @ F700 P2 and got an instant 0 which was odd. I applied 1v5a @F7000 P2 and have no draw, indicating no short.

I'm very confused. Send help.
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
11-28-2023, 02:13 PM
MACBOOK PRO A2141 SSD SHORT

by Arshad alam4659

I HAVE A MACBOOK PRO A2141 820-01700 THIS BOARD IS PP2V5_NAND_SSD1 SHORT TO GROUND THEN I CHECK ONE SIDE U8600 IS SHORT THIS SIDE IS ONLY ONE CHIP U8600 OTHER SIDE
PP2V5_NAND_SSD1 IS OK AND U9100 U9200 U9300 U9400 IS ALSO OK Will removing the U8600 fix the board or will I have to install a new one

Link to boardview --> https://www.badcaps.net/forum/troubl...91#post1449091
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
10-01-2024, 08:26 AM
MacBook Pro A2141 replaced battery not booting from battery not charging. Works with power suppy

by Schluchti45

Hello,

i ask if someone has a hint for me. I have a A2141. The original battery died and i replaced it with a new one form Ifixit. After the replacement the MacBook Boots only with the power supply.
Coconut Battery is recognize the battery but it is not charging. When i remove the power supply the MacBook is immediately dead.
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
11-18-2024, 02:05 AM
Macbook pro A2141 graphics short

by Arshad alam4659

Macbook pro a2141 PP1V8_S0_GPU is short to ground , how can i disable gpu, someone tell me
- Channel: Schematic Requests ONLY!
09-23-2025, 06:59 AM
Loading...
No more items.

MacBook Pro A2141 (820-01700-A) Not turning on, drawing 0.088-0.04A at 20V

MacBook Pro A2141 (820-01700-A) Not turning on, drawing 0.088-0.04A at 20V

Related Topics