Hello friends, I have a board without schematics. granger2-6050A3024001. I have 3 and 5 volts. But there is a very low consumption. I want to identify U472, to be a RAM memory source. When pressing the button, there is no activation. The coil does not show anything abnormal, although the 5 volts part has an impedance of 33.2 ohms; I consider this voltage optional because it is always activated.
Please help identify these components in granger2-6050A3024001 MB
Collapse
X
Related Topics
Collapse
-
by User2025Hi,
I am working on a Surface Laptop GO 3, which is the new release 2024 with a i5-1230U processor. Originally, it had a 256GB SSD, then the owner attempted to upgrade it to 1TB SSD by himself. "Surprisingly", it did not boot afterwards, then changed back to the original SSD, did not boot either.
It turned out to be that just a couple of components had been knocked off when the owner was trying to get off the SSD cover with his beloved screw driver.
I do not have another board of same model. Although I have a Laptop Go 2, the layout of that bit...04-29-2025, 04:13 PM -
by YolofolkssHuawei D14 dah98ambad0 rev d please help identify Missing components
Hello I just bought this laptop to be used personally (that I'm currently trying to repair.), I am aware that liquid (gravy) has been spilled in this area before. but there are missing components it it possible to have a board view or a schematic of this? or just an idea on what components its missing?
as far as I know this parts are connected as sense or enable.... that's how far I know...
Images attached:
the picture of the area. and some of the pinouts that I noticed on the chip... -
by pronesterHi guys,
I need some help to identify this burnt components of the GPU as per attachment.
FYI this is the GPU spec:
https://www.techpowerup.com/gpu-spec...cu-ii-oc.b2130
I have the boardview but it does not provide the parts number etc.
Does anyone have any info on this part of the circuit?
Many thanks.1 Photo-
Channel: BIOS & Schematic Requests!
-
-
by matykaHelp identify this components PQ44 and PQ42 board MS-17711 ver1.1
I have burnt PQ44 and PQ42 ( I think PQ44 is a SM3316) I have no idea what is PQ42... -
by thesameHy guys , i have a DVR board DS-80104 REV 2.2 that was powered wrong, i have some smds on the board that are blown and i can't identify them , maybe if someone has this board somehow and we can identify the smds', i have searched online and i can't find a schematic.
The smds are SOT-23-6 , one of them i think it has the marking ADJF since i found another one on the board with this marking , but the other one it seems that it starts with AG or it looks like. I would really apreciate if someone could help me identify those IC's .
... - Loading...
- No more items.
Comment