I have some boardvies that are in pdf format. i cannot see small component marking because only 500% zoom
is there som e good app that goes more than 500x zoom ?
is there som e good app that goes more than 500x zoom ?
-
-
The PDF format has locked in the resolution. When you zoom in, the low resolution is zoomed in so it may look crappy. You really need the original BV file and then review it with a BV viewer. The PDF file you are noting is probably just a graphics image placed in the PDF format. -
i dont care about resolution. only i care is position of components. i dont have find BV for Asus FX505DT or DD only this PDFComment
-
damn those google ai for search have some use
Attached FilesComment
-
-
okular is trash. falls after zoomingComment
-
Comment
-
Foxit did great job hereComment
-
Hi there,
I'm looking for anyone who might have information on Apple's embedded Apple Watch charging daughterboard, ID 820-02601. This is currently used by Anker in their Apple Watch charging products, but likely by other Apple partner brands as well.
You can see the board referenced in ChargerLab's teardown of the Anker Y1811 3-in-1 MagSafe cube - they discuss the "Apple Watch wireless charging circuit" about 2/3rds down the page. It's not pictured, but the board ID reads 820-02601-A, which sure sounds like Apple.
This daughterboard uses an interesting...04-21-2025, 11:41 PM -
Hello,
I have problem with my graphic card GV-N3060GAMING OC-12GD.
2 smd elements are missing.
I've already bought a boardview but it's not complete - that specific area is not attached. I tried with different similar models but without success.
This is my PCB
And this is screen of boardview
As you see those missing capacitors or resistors are not on boardview.
Also i compared every single transistor from boardview to real card and everything is related.
It seems that this one is like extra.
Could anyone...08-09-2025, 10:26 AM -
Hy guys,
This is my first post here 😁
I've got my hands on a broken Scanwatch 2 (XNAHWA09) that I'd like to fix. The watch won't turn on.
After removing the battery and connecting the watch to an external power source, I noticed that the watch was turning on sporadically.
Upon visual inspection, I haven't found anything obvious except for this inductor, but maybe that's normal .
I can't find any schematics for this watch except photos from this site:
https://fccid.io/XNAHWA09/Internal-Photos/Internal-...09-13-2024, 02:27 PM -
Hi all,
I'm looking for the BoardView file for an ASUS TUF Gaming A15 motherboard, specifically DA0NJM8C0 Rev C (Quanta NJI). My repair technician has identified a power regulation issue, and we need the BoardView to trace the power lines accurately....07-17-2025, 03:59 AM -
Hi, I need the boardview and schematicsfor an HP OMEN 15-ax204ns laptop, purchased in 2018, with the following specifications:- Processor: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz
- RAM: 4.00 + 4.00 GB
- Hard Drive: 1TB
- Product ID: 00325-96088-89605-AAOEM
- N/S: 5CD70805T8
If you can help me locate the boardview and schematics or a boardview file, I would really appreciate it.
Thank you for your help!...
Comment