Programming XMC 25QH256C with a CH341a programmer

[irfan karatela]

I'm able to read and write the chip by selecting a winbond IC of the same size, but when verifying it fails at around 25 percent.

I've modded the ch341a to 3.3v.

Can I update the database to include the XMC 25QH256C?

[mon2]

See if this helps:

https://winraid.level1techs.com/t/gu...34/764?page=39

[SMDFlea]

I'm able to read and write the chip by selecting a winbond IC of the same size, but when verifying it fails at around 25 percent.

I've modded the ch341a to 3.3v.

Can I update the database to include the XMC 25QH256C?

You can add chip support to NeoProgrammer software https://www.badcaps.net/forum/troubl...21#post1622421

[irfan karatela]

Neo Programmer worked perfectly for this IC, Thanks

Unfortunately that wasn't the issue with the laptop i'm currently working on