Assistance with identifying resistor value on 820-02918 A2992 board?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ugamazing
    Senior Member
    • Jun 2013
    • 164
    • usa

    #1

    Assistance with identifying resistor value on 820-02918 A2992 board?

    Working on a 2023 M3 A2992 unit with 820-02918 board, and it uses a new USB-C power architecture, with rectangular controllers. I do not have a perfect-matching board, so have been repairing this one the old-fashioned way (slowly).

    I managed to blow-away a single resistor that I can't find and can't determine the value of. It connects to ground, so I went ahead and stuffed it with a 100K resistor in case it's a simple pull-up. But, I'm now having issues with that side of the board, and am curious if it's possibly related to this resistor! I have no schematics and no board view, so working blind here.

    Photo attached; for reference--this photo was taken of the FAR-LEFT-SIDE of the board when the board is lying CPU-down, and the battery connector oriented towards yourself. It's a small resistor underneath the 2nd-down USB-C controller IC.

    THANK YOU IN ADVANCE!
    Attached Files
  • ugamazing
    Senior Member
    • Jun 2013
    • 164
    • usa

    #2
    By the way: I am hoping someone has this same board and can measure that resistor for me; I know the schematics don't exist and the resistor isn't marked, of course.

    Comment

    • CuriousDave
      Member
      • Aug 2024
      • 11
      • USA

      #3
      Cannot locate the components with the picture. Can you please take another picture that shows exact location? This is like a close up and need the picture shows the general surrounding components. My buddy from Netherlands also looking for schematic but no luck yet. I will check with the Russians and Indonesians if they have it. I usually buy the schema once they get them but haven't find any where yet.

      Comment

      • ugamazing
        Senior Member
        • Jun 2013
        • 164
        • usa

        #4
        Thanks so much, Dave!! Sure thing--I have provided two more photos showing the location of the resistor. This is on the reverse-side of the board (side with WiFi chip), on the left-wing of the board (when battery connector is towards you/at-the-bottom). Let me know if these are still not good enough and I can take some more.

        Click image for larger version

Name:	02918_resistor_3.jpg
Views:	299
Size:	771.2 KB
ID:	3449615

        Click image for larger version

Name:	02918_resistor_2.jpg
Views:	369
Size:	900.8 KB
ID:	3449614

        Comment

        • mrbrown345
          New Member
          • May 2024
          • 1
          • SG

          #5
          Just check with my working board the resistor is 15K.

          Comment

          Related Topics

          Collapse

          Working...