I can not find the exact model of the board since its a rebrand of clevo.
If i am correct it has 6/7 gen i7 with gtx 950m
I already replaced uP1642P on it at gpu side that controls gate.
Gpu has two power mosfets. I take out both. Seems fine ( both 87350d)
Even both is outside still gate gets shorted to ground when power is on instead of 5v.
When i give 1.1v on gpu side it draws 0.6 A or so. Heats up slightly.
I am bout to lose my mind. Please help.
If i am correct it has 6/7 gen i7 with gtx 950m
I already replaced uP1642P on it at gpu side that controls gate.
Gpu has two power mosfets. I take out both. Seems fine ( both 87350d)
Even both is outside still gate gets shorted to ground when power is on instead of 5v.
When i give 1.1v on gpu side it draws 0.6 A or so. Heats up slightly.
I am bout to lose my mind. Please help.
Comment