Hi, Lately I bought an Razer Blade 14 laptop, from 2016 (RZ09-01652). Unfortunetaly, someone probably practiced soldering on it and there are few lost components: L1, U5 and PU7. Model of motherboard is Betty_R4 MB V3.0 20151216. Could someone check the names of the components for me? Thanks in advance.
-
Hi,
I have a Razer Blade Base (2020) notebook with 2 missing MOSFET's. The motherboard marking is DA550-MB MP V4.0. There are no schematics or boardviews available.
I have marked the missing components on the attached screenshot. If anybody has a similar or identical motherboard, please do tell me the part numbers.
Thank you very much in advance!
Cheers,
sect-sin... -
Huawei D14 dah98ambad0 rev d please help identify Missing components
Hello I just bought this laptop to be used personally (that I'm currently trying to repair.), I am aware that liquid (gravy) has been spilled in this area before. but there are missing components it it possible to have a board view or a schematic of this? or just an idea on what components its missing?
as far as I know this parts are connected as sense or enable.... that's how far I know...
Images attached:
the picture of the area. and some of the pinouts that I noticed on the chip... -
Hi, I'm new to this forum.
I recently bought a damaged XFX RX470 for around $10-12 USD. As you can probably see, I believe the only issue is some missing components, likely due to a scratch or a fall.
Can anyone help me confirm which components are missing, and specifically, tell me the value of capacitor C502?...05-20-2025, 06:26 PM -
I have a DJI drone that is not displaying a video feed anymore after a repair.
When tearing down the DJI drone to fix the armature there was some hot glue next to the camera connector that i had to remove.
Now there are missing components either because they got pulled off or because they where never placed.
I have two reference images from XXZ and a photo of mine.
I'm truely hoping someone has another DJI Mini Pro 3 that they can help me identify what these components are and if they are necessary.
On the board view from XXZ they... -
Razer blade 2022, 14" PI480, Ryzen 6900HX, 16gb ram
I picked up a Razer blade 14" (2022) from a friend who said it "overheated" and he replaced one of the fans. He gave up on it as windows wouldn't work/re-install. He gave it to me, and i've been working on getting linux on it. Installing Mint i was able to get about 1/4 through the installer before it froze. Now i can't even get the installer to boot. I am met with a kernel panic.... sometimes. Sometimes it just hangs on the boot sequence.
I've run memtest quite a few times, and more often then not...
Comment