Dear All..
Received with Condition power on but no display, on my DC Bench Supply only 0.780 A. Everything look's like get power except ATI GPU still cold when I touch with my finger. All I have done :
1. Flash Bios ( grab it from toshiba web )
2. Change CPU
3. Reballing ATI 216-0810028
4. Reballing Intel HM76
5. Resoldering every Caps, Coil and PU
With no change, still same at first condition 0.780A but without memory the current raise up to 1.250A. Working without schematic, can't find schematic for this type DABY3CMB8E0 REV:E - Model : BY3C. Any help would be appreciated
Regards
Received with Condition power on but no display, on my DC Bench Supply only 0.780 A. Everything look's like get power except ATI GPU still cold when I touch with my finger. All I have done :
1. Flash Bios ( grab it from toshiba web )
2. Change CPU
3. Reballing ATI 216-0810028
4. Reballing Intel HM76
5. Resoldering every Caps, Coil and PU
With no change, still same at first condition 0.780A but without memory the current raise up to 1.250A. Working without schematic, can't find schematic for this type DABY3CMB8E0 REV:E - Model : BY3C. Any help would be appreciated

Regards
Comment