Announcement

Collapse
No announcement yet.

HP DV9000 again

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    HP DV9000 again

    So im thinking to make xtra fan for gpu and it does fit under the chassis&bottom case ..dc5 v 0.19 amps but witch is the best way the to get that 5v?can i connect to original fan?i doubt that..
    Tags: None
    #2
    Re: HP DV9000 again

    You can, in fact, connect to the original fan. Red wire is +5v, black wire is ground. But the fan you attach will not benefit from the speed control, it will just run maxed all the time. You'll need a bit more circuitry to accomplish that if you desire.
    Originally posted by PeteS in CA
    Remember that by the time consequences of a short-sighted decision are experienced, the idiot who made the bad decision may have already been promoted or moved on to a better job at another company.
    A working TV? How boring!

    Comment

      #3
      Re: HP DV9000 again

      OK,thanks for reply,thats all what i need to know,will do some mods before doing all that thing.And fan is EL silencio

      Comment

        #4
        Re: HP DV9000 again

        usb port +5v alfa dont connect to the original fan

        Comment

          #5
          Re: HP DV9000 again

          Yep ok, i was thinking about it ..so will do the usb ports.

          Comment

            #6
            Re: HP DV9000 again

            how about a copper shim on the gpu instead of the fan?

            Comment

            Previous template Next
            Working...
            X