HP Pavillon DV7-3010sg mainboard PC29 capacitor value

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • DDMEN
    New Member
    • Aug 2012
    • 3
    • Germany
    #1

    HP Pavillon DV7-3010sg mainboard PC29 capacitor value

    Hello,
    not sure if somebody can help me for this specific issue: I'm looking for the capacity of the PC29 capacitor (for the input power 19Vdc) for the HP main board DAUT1AMB6E0 p/n 574681-001 used for an HP Pavillon DV7-3010sg. By a mistake I did blow up this capacitor after I fixed an other issue on this Laptop, all tests passed and during I put the last parts together I got a shortcut on this capacitor
    Many thanks for any help.
    Attached Files
    Last edited by DDMEN; 08-19-2012, 03:25 PM. Reason: add attachment
    Tags: None
    • fddizon
      Badcaps Veteran
      • Sep 2011
      • 555
      • Philippines
      #2
      Re: HP Pavillon DV7-3010sg mainboard PC29 capacitor value

      download schematic from lqv77

      or just replace the cap of the same size is it is a ceramic

        Comment

        • DDMEN
          New Member
          • Aug 2012
          • 3
          • Germany
          #3
          Re: HP Pavillon DV7-3010sg mainboard PC29 capacitor value

          Many thanks fddizon for your great link and the quick response. It's 10uF, replacement works fine. Thanks again!

            Comment

            • acompagnone
              New Member
              • Oct 2012
              • 1
              • italia
              #4
              Re: HP Pavillon DV7-3010sg mainboard PC29 capacitor value

              Originally posted by fddizon
              download schematic from lqv77

              or just replace the cap of the same size is it is a ceramic


              Where can I download schematic for MB daut1amb6e0 ?

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Prolog
                  RTX 3080 FE Identifying capacitor
                  by Prolog
                  Hi people, I hope this is the correct spot to post this, I'm new to the forum.

                  I have an RTX 3080 Founders Edition which has a burnt up capacitor (it was in parallel with another capacitor which appears damaged too), so I am hoping to be able to identify the capacitor values and order replacements.

                  I hope these photos make it clear which component I am referring to:
                  (yes, the soldering is a bit botched from removing the blown one, I know)

                  I have found the board schematic (attached), but there does not seem to be a boardview available. I have never...
                  12-01-2024, 08:27 PM
                • BlackBurn
                  Help to identify a laptop mainboard SMD capacitor LA-9982P
                  by BlackBurn
                  Hello everyone,

                  I have an Dell Inspiron 15 3537 laptop mainboard (LA-9982P Rev. 3.0 (A02)) with a blown SMD capacitor as shown in the attached images. However, there is no printed specifications near the capacitor or a codename for the capacitor to identify the specification of the capacitor to replace it. I wonder how to identify the capacitor since the mainboard schematics are also useless as the capacitors are not named on the board. Any help would be highly appreciated.

                  Thank You. Stay Safe.
                  Chamara...
                  11-27-2020, 08:30 AM
                • chth96
                  If I replace with inferior capacitor, Is it No harm to other IC components at all?
                  by chth96
                  I replaced some capacitor which is located on optical pickup pcb which is shown in the table below(PCB #2).Because it have been out of order.
                  Now,It works very well,But I just have found that all caps (6svpc100my and other part number as well) ,which is shown in the table below, has ultra-high ripple current spec.
                  It is not able to obtain any capacitor which can be a substitute for this ultra-high ripple current nichicon capacitor.
                  So I replaced it with samxon and rubycon's general capacitor(GP,YXA series).
                  I know that these capacitor will not last as long as nichicon capacitor...
                  12-22-2023, 04:34 AM
                • chth96
                  How can I test non-polarized capacitor?
                  by chth96
                  I desoldered samwha NF capacitor(50v 5.6uf) from PCB circuit of 29inch CRT TV which have symptoms of no display after I heard sound of inrush of current to TV whenever I switch on this television.
                  I measured ESR value of this non-polarized capacitor(samwha NF capacitor 50v 5.6uf) by means of MESR-100 ESR meter and It displayed 0.3 ohm

                  And When I measured its capacitance with digital multimeter and LCR-T4 Mega328 meter, It displayed 10uf from DMM and 8uf from LCR-T4 meter.
                  I found catalogue of samwha capacitor(samwha-catalogue_3.pdf file), which is attached to this thread,...
                  06-02-2024, 07:31 PM
                • chth96
                  Is it no harm to replace with capacitor without ripple current rating?
                  by chth96
                  When I tried to repair LG 29 inch CRT TV, I found that the ESR value of samyoung SMS capacitor(160v 2.2uf), which is very close to D1879 transistor, is 6 ohm.


                  Judging from above ESR Meter Table,I think It is necessary to replace this sms capacitor.So I visited local electronics shop,and I purchased 160v 2.2uf rubycon YK capacitor.
                  But when I browse through rubycon YK datasheet,I found that there is no ripple current rating for 160v 2.2uf specification. But On the contrary, I found 39 mA ripple current rating for 160v 2.2uf SMS capacitor.
                  Rubycon YK DataSheet (b...
                  04-19-2024, 05:19 AM
                • Loading...
                • No more items.
                Working...