820-01958 PPVCC_NAND_SSD0 problem

[Lakai]

Hi all!

Got this lightly water damaged (C6528 fried).
20V generated, everything seems to warm up, but I have problems with U9060.
This little guy is outputing 7V
So it cycles on trying to power SSD.
I try to read datasheet,TPS62130 seeems to be adjustable but by what?
Hope SSD is not fried.

[reformatt]

Re: 820-01958 PPVCC_NAND_SSD0 problem

R9070~R9073 voltage divider network sets the voltage. However I'd be removing this IC to check for liquid damage underneath. 7V is likely dead NAND's unfortunately.