Elitebook 850 G6 (6050A3022501-MB-A01(A1);SN:5CG941023G)U365 Soldering Error

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • szuts
    Member
    • Jul 2022
    • 15
    • Magyarország
    #1

    Elitebook 850 G6 (6050A3022501-MB-A01(A1);SN:5CG941023G)U365 Soldering Error

    Helló!
    I lost a resistor next to U365 due to a soldering error. Does anyone know what value of resistance was there?
    Thx!
    Attached Files
    Tags: None
    • SMDFlea
      Super Moderator
      • Jan 2018
      • 20374
      • UK
      #2
      Re: Elitebook 850 G6 (6050A3022501-MB-A01(A1);SN:5CG941023G)U365 Soldering Error

      Originally posted by szuts
      Helló!
      I lost a resistor next to U365 due to a soldering error. Does anyone know what value of resistance was there?
      Thx!
      Check the schematic https://www.badcaps.net/forum/showthread.php?t=108193 U366

      .
      Last edited by SMDFlea; 10-06-2023, 03:09 PM.
      All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

        Comment

        • szuts
          Member
          • Jul 2022
          • 15
          • Magyarország
          #3
          Re: Elitebook 850 G6 (6050A3022501-MB-A01(A1);SN:5CG941023G)U365 Soldering Error

          Thank you very much. This was fast.

            Comment

            • SMDFlea
              Super Moderator
              • Jan 2018
              • 20374
              • UK
              #4
              Re: Elitebook 850 G6 (6050A3022501-MB-A01(A1);SN:5CG941023G)U365 Soldering Error

              Originally posted by szuts
              Thank you very much. This was fast.
              All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Azurain
                  Elitebook 840 G5 Bios Chip Soldering Question
                  by Azurain
                  Hi everyone,

                  I have an HP Elitebook 840 G5 that I am trying to get working again. I've removed the front bios chip (the 32mb one) and have run it through HP unlocker already. I've uploaded and verified the new bin, but am now experiencing an issue that has led me to believe I've been soldering the chip back to the motherboard incorrectly.

                  Essentially, after re-soldering the chip back into its place and reassembling the laptop, the charging light immediately flashes orange and white and then shifts to a solid white. The capslock and numlock lights blink seven times...
                  04-14-2023, 06:58 PM
                • Sus256
                  HISENSE 65E7KQ PRO - no boot
                  by Sus256
                  Hi all!

                  HISENSE 65E7KQ PRO
                  RSAG7.820.13512 - chassis
                  MT9618BAATAB - cpu
                  RSAG7.820.12059 - power
                  HD650Y3U77 - panel
                  KLM8G1GETF - emmc

                  The TV does not turn on, the standby indicator is on. All voltages are present.
                  Emms is dead. Not readable, not detected.
                  Replaced emmc.
                  But with another dump there is no launch

                  Terminal log

                  UART
                  <
                  AC_ON
                  RPMB key is not yet programmed

                  HASH1_VERSION=0x00000000 64bit
                  E-B
                  FDE enabled
                  layout pattern onebin by SAR7,0...
                  06-01-2025, 02:11 AM
                • STKR123
                  The right BIOS Programmer - The right software (HP Elitebook 820 G1, 840 G2) no soldering, EC, DMI, ME
                  by STKR123
                  Greetings badcaps community,

                  I havent done this for a long time and want to start it all again, after some evil and annyoing illness.
                  So I apologize in advance, if some phrases might sound a bit like gibberish or illogical to you.

                  Im trying my best to fully describe what I plan to achieve and hope I was choosing the right sub-forum for my new adventure.

                  I have a Elitebook 820 G1 and a Elitebook 840 G2 here.

                  These ask for a password when entering the BIOS, but boot just fine from the internal SSD.

                  I learned that desoldering...
                  10-29-2024, 06:03 AM
                • Nene01
                  HP Elitebook 830 G8 HP Endpoint Controller error and no power issue (intermitent)
                  by Nene01
                  Hi all,

                  I have a HP Elitebook 830 G8 with endpoint controller error and besides that laptop sometimes doesn´t power on and i think it´s bios related also.
                  I already tried to solve the issue with SMDFlea patch fix and now i can´t power on the equipment anymore not even replacing main bios by its original.

                  Please take a look at my original main bios and help me if possible (i also attached EC BIOS without password).
                  The mainboard also had password that i manage to remove.

                  Thanks
                  Best Regards...
                  01-11-2025, 01:09 PM
                • i440bx
                  Elitebook 820 G3 engineering example: CMOS settings lost despite new cell
                  by i440bx
                  Hey there,

                  I got a HP Elitebook 820 G3 Engineering Sample Laptop and I want to use it. Besides the difficult things at the ES-BIOS I have a big problem by saving the main BIOS settings.

                  The laptop does not have a big battery because it was dead, but I already plugged in a new CMOS battery.

                  It takes about 5min without power and the BIOS settings are lost. Unfortunatly I dont understand why the BIOS settings are only saved with power connected and this is the reason why I registered here.

                  As written above, I plugged in a new CMOS cell and checked...
                  3 Photos
                  08-19-2024, 02:28 PM
                • Loading...
                • No more items.
                Working...