A1708 Weird boot behaviour

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dome1
    New Member
    • May 2023
    • 3
    • Belgiรซ

    #1

    A1708 Weird boot behaviour

    Hello!

    This is my first post here.

    Recently i repaired my costumers a1708, 820-00875. Where U3200 was in short, it got replaced, device started working again without problems. Fastforward 4 months and it has problems with booting.

    Sometimes it shows apple logo, is stuck, then shows a crash screen
    Sometimes it just boots normally

    It wont allow me boot externaly, Tried 3 diffrent osx, Bigsur, Monterey, Ventura.

    From what i gather i assume bios is corrupted, but what programmer do i use? where do i begin? Any help is welcome

    @Edit

    Already tried diffrent internal ssd, the smc/pram reset.
    Last edited by dome1; 06-29-2023, 08:53 AM.
  • Adogabriel100
    knowledge seeke
    • Aug 2021
    • 36
    • peru

    #2
    Re: A1708 Weird boot behaviour

    Did u already try Command + R? re-install system via online? secure boot on this macbook is activated i suppose, that's why dont allow u to boot an external HDD?

    if you are pressing Command + R and does not get you in the recovery menu try this: plug in an external HDD with diferent mac os installers and try again Command + R.

    Comment

    Related Topics

    Collapse

    • ahoonid
      A1708 820-00840 No boot - trackpad clicks - 20V 0.55amp
      by ahoonid
      Hi everyone.

      I have MacBook Pro A1708 with a confusing issue.
      The laptop doesn't turn on. Strangely, the trackpad clicks and fan spins. Caps lock doesn't turn on and no chime.

      Initially, the amp meter didn't turn on at all on one of the usb c ports. On the other port, I got 20V and half an amp tho (no battery connected).
      I replaced the bad CD3215 chip and now it works as well. Both ports turn on with same amp readings.

      The initial issue however remains.
      No boot. No backlight. No chime. No keyboard. Only signs of life are clickable trackpad...
      05-10-2025, 04:19 PM
    • privato89
      Nintendo Switch Oled HEG-001: Second-Stage Boot Failure
      by privato89
      Hello everyone,

      I'm facing an issue with a HEG-001 motherboard that is unable to complete the Second-Stage Boot. I'd like to start directly with my conclusion, which is the decision to replace the MAX77621AEWI chip, and understand if it could be a correct evaluation.

      Before I dive into the process that led me to this decision, I want to mention that I have a fully equipped lab where I can perform any kind of tests.

      Let's begin:

      Following some guides online, I tried to understand how the Boot phase of the Nintendo Switch works, and what are the...
      03-26-2024, 06:37 AM
    • hinisa
      Xiaomi router freezes at boot after re-capping
      by hinisa
      I'm using Xiaomi Router 4A gigabit edition as wireless repeater. It worked fine for 2 years or so, but last week, wireless started to disappear.

      When I unplug/replug the power, it was working fine for a day/half a day or so until it freezes again.

      After testing with different power supply adapters and concluding it wasn't the issue I finally opened the case and this was the situation:



      Anyway I proceed to clean up the mess and replace all caps but unfortunately it made the situation worse. Now router can't even boot, either it freezes during...
      07-08-2023, 05:58 AM
    • Luke Anders
      Lenovo Legion 5 (15ACH6H/17ACH6H) - Does not boot into any OS
      by Luke Anders
      Hi everyone,

      A few details about the laptop itself:

      Name: Lenovo Legion 5
      Model: 15ACH6H (according to its back cover details) / 17ACH6H (according to the BIOS Menu)
      BIOS Version: GKCN60WW
      EC Version: GKEC65WW
      Serial Number: PF39AQ7Z
      Board Model: NM-D562 Rev 3.0
      RAM: 16GB Installed, DDR4 (brand new)
      NVME: 500GB NVME drive (brand new, installed Windows 10 onto it for testing purposes and tested on another laptop (a dell XPS) works perfectly fine and boots in)

      I bought this laptop recently from eBay as a faulty device....
      10-12-2024, 05:13 AM
    • NolesFan
      Samsung un82ru88000f - Boot loop sort of but can correct with taping of LVDS ribbon
      by NolesFan
      Hello all... TV started boot looping. Opened the back panel and tried to isolate the problem. Just PSB no boot loop. PSB and MB no boot loop. Plug in the LVDS from panel to MB and boot looping starts up. It doesnt matter of order that I plug the LVDS ribbons back in, only 1 and no boot loop but as soon as 2nd one plugs in boot looping. I then noticed a flicker on the screen when I was closing the clip on the harness to the LVDS. Shut the lights off so I can see better, and I noticed as i slowly close it, I will get a picture, but as soon as it clips in, I lose picture and booting happens. So I...
      10-24-2024, 06:36 PM
    • Loading...
    • No more items.
    Working...