Hai guys, i have a problem with this hp laptop.
I already found there is a problem with power button, usb-c board (see picture) that cause its not turning on.
When i remove this small board, laptop can turn on by shorted the power switch pin with tweezers. (Pin 14 from left side)
But when its attached, laptop wont start when i press the power button.
Already check 3.3V at power button swith, its respond when I press it (0V)
I think maybe i have a problem with usb 3.0 ic here, i just wonder if this is oke to remove the ic, and power in on to test this? Or do i need to find a replacement first before test?
NB: Mainboard HEDWIG02 6050A3285801 MB A01
If anyone can share its schematic, thanks
I already found there is a problem with power button, usb-c board (see picture) that cause its not turning on.
When i remove this small board, laptop can turn on by shorted the power switch pin with tweezers. (Pin 14 from left side)
But when its attached, laptop wont start when i press the power button.
Already check 3.3V at power button swith, its respond when I press it (0V)
I think maybe i have a problem with usb 3.0 ic here, i just wonder if this is oke to remove the ic, and power in on to test this? Or do i need to find a replacement first before test?
NB: Mainboard HEDWIG02 6050A3285801 MB A01
If anyone can share its schematic, thanks
Comment