Can I replace mosfet 4C06B with 4C09B?
-
I have water damage on this HP board and found another HP board with a similar mosfet.
The big difference I can find on the datasheet is that one is a "30V Dual Asymmetric N-Channel MOSFET" and the other is a "30V N-Channel MOSFET"
I'll Link the datasheets
https://www.aosmd.com/sites/default/.../AONH36334.pdf
https://www.aosmd.com/sites/default/.../AONS36316.pdf
I could just try it but I'm worried that I might blow other components.
Anyone have any insight as to whether it's safe... -
help what mosfet can i replace this charging mosfet 6520 the brand of laptop is dell inspiron 14 3000... -
Hi,
My laptop went dead and after checking ,the main 19 volt power rail was shorted. After some checks i could identify that a high side vcore mosfet was shorted.
I replaced the mosfet and now the white powerled is present , fans start spinning but capslock shows the famous 5 long and 3 short code.
I checked the vcore voltages after replacement and i get for all 1.01 V so means for me that the driver is still working of the replaced shorted mosfet. On the Nvidia i measure around 0.8 V after the mosfets.
I did voltage injection on the cpu with 0.7V and i have a current... -
I tried to use this method:
Testing an N-channel MOSFET:
Step 1: Discharge the Gate (turn off the MOSFET)
Place the black probe (COM) on the Source (S) and the red probe on the Drain (D). The multimeter should show no continuity (high resistance or "OL" – open line).
Then, touch the black probe to the Source (S) and the red probe to the Gate (G). This discharges any stored charge in the Gate, turning the MOSFET off.
Step 2: Charge the Gate (turn on the MOSFET)
Now, place the red probe on the Gate (G) and the black probe on the...09-27-2024, 03:31 AM -
i NEED Help any replacement for this mosfet M3092M?can i replaced with EMB20N03
Comment