Need PS4 Slim Power Supply Diagram N160A006P

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • fab13
    Senior Member
    • Dec 2021
    • 109
    • France

    #1

    Need PS4 Slim Power Supply Diagram N160A006P

    Hello to all,

    I have my power supply that does not provide 5 Volts and I would like to have a diagram for the PS4 Slim N160A006P power supply

    Thanks a lot
  • fab13
    Senior Member
    • Dec 2021
    • 109
    • France

    #2
    Re: Need PS4 Slim Power Supply Diagram N160A006P

    It's for 17-160p1a

    Comment

    Related Topics

    Collapse

    • JimBanville
      Definitive technology SC 2000 subwoofer amp's power supply clicking and popping
      by JimBanville
      The sub developed a constant popping every couple seconds from woofer and power LED flickering with nothing but wall AC connected. Connecting an audio cable didn't change anything. It doesn't play but a second or two of audio in between the pops.
      Opened it up and discovered the power supply is making a faint clicking or ticking sound.
      I measured the amp's output to the woofer and it pulses up to 50mv DC to be driver. The pulses coincide with the power supply ticking/clicking.
      I measured the power supply output going to the amp board and it too has this pulsing. Voltage cycles...
      09-13-2023, 07:21 AM
    • Tynan Dill
      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
      by Tynan Dill
      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

      Upon bringing it home and plugging it up, it showed a standby light.

      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

      The screen seems to blackout and stay black, but with a flashlight I can see the display.

      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

      Assuming...
      11-22-2024, 01:46 PM
    • CMCM
      Russound CA4 Power Supply Repair
      by CMCM
      Hello Everybody,

      Trying to repair a power supply from a Russound CA4 Multizone Controller (picture attached)

      Russound no longer supports it but were kind enough to provide a schematic of the power supply (pdf attached).

      The outputs marked 12v and 20v are all measuring only 1v.

      The board is clicking, which I think means it is in something called hiccup mode when the flyback transformers switches because of an internal problem or something else on the board Overloading it.

      The capacitors physically look clean (no bludgesor leaks) and...
      07-03-2025, 01:12 PM
    • sam_sam_sam
      12 volt switching power supply modification to 14.5 volts before blocking diode add
      by sam_sam_sam
      I saw this switching power supply on eBay and wanted to see if could be modified to run 14.5 volts before the blocking diode was add and this switching power supply seems to have no issues doing this

      I did recap the switching power supply except the the main filtering capacitors and I managed to break the selector switch for the voltage setting but just jumped it

      One note I used 25 volt capacitors on the output side of this power supply because they used 16 volt capacitors and because I am running the voltage up a little bit higher 12 volts to 14.5 volts there would...
      04-11-2021, 11:01 AM
    • modtool
      Sony PS4 slim CUH-2216A power supply ADP-160FR not working after short in PFC
      by modtool
      Dear forum members,
      I'm working on this power supply for ps4 slim, that behaves in a similar manner as other cases but I can't find a way to solve the problem.
      When it came to me, externally the ps4 had standby voltage, clicking the disc eject button made the triple beep (without disc inside) and cliking on the power button made the blue power light turn on and then all turned off within 1 second.
      When I opened it up, I found these components shorted:
      Q6 24N60M2
      IC41 1612A (not really shorted but had a hole on it and all pins measured open circuit but the 9th...
      05-31-2023, 08:09 AM
    • Loading...
    • No more items.
    Working...