Help

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ljubo
    New Member
    • Jan 2021
    • 8
    • srbija
    #1

    Help

    Can anyone help me?
    What is this component: MOSFET or SCHOTTKY BARRIER RECTIFIERS?

    This is a battery plate for Bluetooth Speaker..
    Attached Files
    Tags: None
    • SMDFlea
      Super Moderator
      • Jan 2018
      • 20609
      • UK
      #2
      Re: Help

      Post the Bluetooth Speaker make and model number so that it can be added to the thread title !
      All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

        Comment

        • ljubo
          New Member
          • Jan 2021
          • 8
          • srbija
          #3
          Re: Help

          i only have a battery..

            Comment

            • SMDFlea
              Super Moderator
              • Jan 2018
              • 20609
              • UK
              #4
              Re: Help

              Originally posted by ljubo
              i only have a battery..
              Ok so post the battery part number and the PCB part number
              All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

                Comment

                • ljubo
                  New Member
                  • Jan 2021
                  • 8
                  • srbija
                  #5
                  Re: Help

                  RoHS
                  AsRT
                  E248037
                  94VO

                    Comment

                    • SMDFlea
                      Super Moderator
                      • Jan 2018
                      • 20609
                      • UK
                      #6
                      Re: Help

                      Originally posted by ljubo
                      RoHS
                      AsRT
                      E248037
                      94VO
                      Post pictures of the whole PCB front and back
                      All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • howardc64
                          QN75QN85BAFXZA no backlight
                          by howardc64
                          2+ year old TV with many (720? 65" version has 720) mini LED dimming zones. TV boots, has sound, panel picture can be seen with flashlight. No backlight. No TV model sticker on rear panel (Maybe Samsung service removed it, read below). Found the model # through the PSU and zoned LED driver board numbers.

                          PSU has a click near LED output circuit at 1 second interval, sounded like the 4x barrier rectifier area. Protective pastic liner under PSU shows heat signature on the Schottky Barrier Rectifier in this circuit. Found a shorted diode (2 diode per rectifier, failed rectifier labled...
                          07-03-2025, 05:08 PM
                        • lfhlaw
                          Busted/cracked Light diffuser plate Samsung UN55NU7100
                          by lfhlaw
                          I was attempting to replace the LED lights on an Edge-lit Samsung UN55NU7100...While removing the sheets and the light diffuser plate which already had cracks at the bottom. The plate bent(more than I'd like) and broken in half.

                          1) Is it still usable if I can put in back into place

                          2) or Do I have to find a replacement diffuser plate and can it be any diffuser plate from a 55" Samsung LED TV or specific to my model?

                          3) can a new plate be purchased from Samsung?
                          03-21-2021, 01:31 PM
                        • rtstorm
                          LG 42LD420 no power
                          by rtstorm
                          Hello, a friend sends me this LG TV that has been thunderstrike. When plugged in TV show red light and on the power press button TV show a blue LED. I have 3.3V and 20V lines coming to the main board but no picture on the TV.

                          I found that one Zenner diode was shorted (i tested all other diodes) but when pulled out from the board it turn out just fine (no short). Next to the diode is a resistor that shows 0 Ohm but i do not know what value should be that resistor.

                          Can you please help me to determine the value of the resistor?

                          Also, I notice that a few...
                          08-03-2022, 03:11 PM
                        • iyas132
                          Corsair RM 750 blown schottky diode near ES1DF
                          by iyas132
                          Hi there, i am currently diagnosing my corsair rm750 that wont turn on, after a power trip.

                          Before the power trip, previously i need to push power button on my pc case quite a bit in order to turn the pc (and power supply on), however after the power trip now i cannot turn the pc on at all and i opened the power supply, and found out some of the component(s) are blown. (picture attached)

                          My current diagnostic is that the (schottky) diode marked "SF" in the 5Vsb circuit are blown and possibly the ES1DF diode too.

                          Can anyone help me identify the component...
                          1 Photo
                          12-30-2024, 01:34 AM
                        • MrCommunistGen
                          Polk Audio RTi100 Plate Amplifier won't power on and intermittently honks and buzzes
                          by MrCommunistGen
                          My childhood best friend was killed about 9 years ago. His parents are finally letting go of his things, and they offered me his Polk RTi100 tower speakers. The Polk RTi100 towers are one of a handful of designs from the early 2000s that is a full range 3-way tower with a built-in self-powered subwoofer. This is accomplished with a plate amp integrated into the speaker input panel.

                          I think they used them for a while, but they've been sitting for at least a few years now. After about 40 hours of driving to their house and back (both they and I have moved in the last 9 years) I got...
                          07-12-2021, 05:11 PM
                        • Loading...
                        • No more items.
                        Working...