Garmin Striker plus 4 fishfinder help identifying fried smd's

PCTechnics

Member

Join Date: Sep 2013

Posts: 30

Country: Argentina
#1

Garmin Striker plus 4 fishfinder help identifying fried smd's

02-15-2020, 06:20 PM

Hi guys, a friend of mine brought me a fried Garmin Striker plus 4 fishfinder with GPS (thanks to the boat tech who inverted the power cord at installing. I need help to identify this smd resistor look a like, it could be an inductor i think (no serigraphy) completely broken. And the tiny one could be a diode.Many thanx in advance!
Attached Files
Tags: None

Previous template Next

Garmin Nuvi 3590LM Help identifying component

by Iph

I haven't been able to find a visual match in my search. Hopefully what this is, may be obvious to a lot of you guys. What is this?

Alt:
https://imgur.com/3b9Zpmx

Also, any hints on where to find specs, or how to diagnose it? Without knowing what it is, I'm nit quite sure how to tell if it's busted or not.

FWIW, this is a Garmin Nuvi 3590LM that won't charge or communicate over USB after the user inserted the micro-USB plug the wrong way. Functional when charging battery by other means (bench psu), but USB seems dead. I replaced...
- Channel: Troubleshooting Game Consoles & Other Weird Devices
08-20-2021, 02:27 AM
[LA-J891P] Warm cpu on 19v rail injection, is it fried ?

by tamerelapute

Hi,
I'm learning electronics(already have some basics) by fixing a FH52M LA-J891P rev1B. It come from an acer nitro 5. The charger was defaulting upon pluging. The 19V rail resistance is 0ohm (I believe that caps screw my measurement). When i inject 5A, I get a rail tension of 1.3V, and 0.8V vcccore.
Except the cpu, I cant feel anything getting warmer.
I believe that it is normal, because the cpu is "eating" half the power I'm imputing.
I dont know if the cpu is fried, because I did not remove the big capacitor on vcccore.
I believe that if the cpu was fried,...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
07-08-2024, 03:28 PM
Lenovo Ideapad Flex 5 14IAU7 (LC57-IAU MB 213062-1M) identifying elements

by Khoja
Hello friends, I have a Lenovo Ideapad Flex 5 14IAU7 laptop that doesn’t turn on. When I opened it, I found a burnt resistor on the motherboard. Since I couldn’t find a schematic for this model, I need help identifying the parameters of this resistor.
- Model: Lenovo Ideapad Flex 5 14IAU7
- SN: PW0AZK3W
- Motherboard: LC57-IAU MB 213062-1M 448.0RH09.001M
Any assistance would be greatly appreciated!...

1 Photo
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
Yesterday, 09:56 AM
KOORUI 24E4 monitor with HKC HKM238Fj01 panel I need help with identifying TCON ic.

by SendyCatKiller

Hello! I am looking for help with identifying this tcon chip on KOORUI 24E4 monitor.
Driver board number: pn238ct01-3-xc-2
Other IC on the driver board: NT71265MFG-001

...
- Channel: Troubleshooting Computer Displays
08-22-2025, 01:01 PM
Nintendo switch HAC-CPU-20 help identifying resistors

by Adam Biderman

Good morning, I would appreciate help identifying resistors responsible probably for volume down / volume up buttons that I accidently knocked off while replacing fan connector. I enclose picture with location. Thank you for help in advance.

1 Photo
- Channel: Troubleshooting Game Consoles & Other Weird Devices
07-19-2025, 01:49 AM
Loading...
No more items.

Garmin Striker plus 4 fishfinder help identifying fried smd's

Garmin Striker plus 4 fishfinder help identifying fried smd's

Related Topics