Hi, I have a ps5 EDM-033 that lights up blue for 1 seconds and then turns off
the start sequence is correct, it reaches 320ma and then drops to 10ma
checking the card I didn't find any shorts
Reading the codes via huart gives me the following errors:
01 31/05/2025 10:48:09 80801F12 Low Known Unknown 80801F12 (Kernel) - Report Findings - 1 sec blue light
I-(OK 00000000 80801F12 000405B3 FFFF0005 00000100 2013 0036 3840 0000:FE)
26 28/09/2038 01:45:59 80801608 Low Known Unknown 80801608 (Kernel) - Report Findings
I-(OK 00000000 80801608 19154CA1 FFFF0005 00000100 2013 003E 1D9D 19D4:62)
as read on other posts with the same error, i tried to change the ram modules.
first 2 and 5 and then 3 as suggested. but the error code does not change.
leaving the console without ram 3 and then without ram 4 the code is always the same 80801F12
It seems strange to me that the error code does not change. Could it be due to something else? Any suggestions?
thanks
the start sequence is correct, it reaches 320ma and then drops to 10ma
checking the card I didn't find any shorts
Reading the codes via huart gives me the following errors:
01 31/05/2025 10:48:09 80801F12 Low Known Unknown 80801F12 (Kernel) - Report Findings - 1 sec blue light
I-(OK 00000000 80801F12 000405B3 FFFF0005 00000100 2013 0036 3840 0000:FE)
26 28/09/2038 01:45:59 80801608 Low Known Unknown 80801608 (Kernel) - Report Findings
I-(OK 00000000 80801608 19154CA1 FFFF0005 00000100 2013 003E 1D9D 19D4:62)
as read on other posts with the same error, i tried to change the ram modules.
first 2 and 5 and then 3 as suggested. but the error code does not change.
leaving the console without ram 3 and then without ram 4 the code is always the same 80801F12
It seems strange to me that the error code does not change. Could it be due to something else? Any suggestions?
thanks