i got myself a complete Antminer T17+ with 3 dead hasboards for a very good price.... for parts i bought S17PRO boards.... i replaced all missing resistors and changed some asics because they were bad... but wihout a tester... i used the miner instead and changed firmware to awesome miner firmware for better and faster diagnoses via miner log and lower fan speed...
for my understanding and what i read on the internet these asics should be interchangeable in one chain but in my case i´m getting no more communication to none of the asics on all 3 boards. 2 of the boards weren´t in that bad condition. only lost some heatsinks rippin´out some resitstors and capacitors. on one there was 1 asic found and on aanother 43 asics of 44 per board... one was "zero asics" so i spent more time on the others...
aren´t these interchangeable? risky without a hasboard tester i know...
if i´m not able to fix the board i bought them for building a "hex Bitaxe" from them with few of the asics
thx
for my understanding and what i read on the internet these asics should be interchangeable in one chain but in my case i´m getting no more communication to none of the asics on all 3 boards. 2 of the boards weren´t in that bad condition. only lost some heatsinks rippin´out some resitstors and capacitors. on one there was 1 asic found and on aanother 43 asics of 44 per board... one was "zero asics" so i spent more time on the others...
aren´t these interchangeable? risky without a hasboard tester i know...
if i´m not able to fix the board i bought them for building a "hex Bitaxe" from them with few of the asics
thx
Comment