Need Help PS 4 SAA-001 broken Board

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ReslCheesy
    New Member
    • Oct 2024
    • 3
    • Germany
    #1

    Need Help PS 4 SAA-001 broken Board

    Hello, I have a defective SAA-001 PS4 motherboard. Someone tried to forcibly open the case and damaged the board in the process.
    Can anyone tell me what components have been destroyed and what they are responsible for?
    Does anyone perhaps have a schematic for this board?
    Click image for larger version Name: IMG_0218.jpg Views: 403 Size: 893.8 KB ID: 3476048Thank you very much for your help.
    ​
    Tags: None
    • ADRdaniel
      Open sauce 2025
      • Nov 2023
      • 7
      • United States
      #2
      https://www.psdevwiki.com/ps4/SAA-001#Components

      Click image for larger version Name: Artboard3.png Views: 362 Size: 1.98 MB ID: 3478225


      have a dig through
      https://gamesx.com/wiki/doku.php?id=...ted_schematics
      doesn't have ps4 but good spot

      here's a likely spot to find some answers:
      https://www.tronicsfixforum.com/tag/ps4 zz0.idjkybz9p2ozz
      keep an eye on:
      https://www.retrosix.wiki/
      They haven't added anything to the PS4 section, but they will, and it will be useful.


      Those damaged traces go this IC (below) after passing through 6 SOT-23 parts.
      Click image for larger version Name: Artboard4.png Views: 119 Size: 2.05 MB ID: 3478226
      i'd have a look at that IC's data sheet
      https://www.psdevwiki.com/ps4/A01-COL
      "
      • Renesas R5F100PL (RL78/G13, 100 pin)
      ​"Click image for larger version Name: R5F100PL True Low Power Platform.png Views: 119 Size: 185.5 KB ID: 3478227

      there could be example circuits with component values and maybe nominal signal waveforms.


      Someone will find the ps4 board view soon I hope,


      hope I gave you a fighting chance. You will definitely need a donor board for this mess.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Tynan Dill
          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
          by Tynan Dill
          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

          Upon bringing it home and plugging it up, it showed a standby light.

          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

          The screen seems to blackout and stay black, but with a flashlight I can see the display.

          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

          Assuming...
          ORIGINAL POWER SUPPLY BOARD
          7 Photos
          11-22-2024, 01:46 PM
        • m1ch43lzm
          HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
          by m1ch43lzm
          Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
          Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
          05-12-2025, 08:37 PM
        • howardc64
          A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
          by howardc64
          Problem

          This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
          08-04-2024, 10:36 PM
        • Hakuu
          LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
          by Hakuu
          Hi There,

          This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

          After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

          More Details

          TV Model - LG OLED77G1PUA

          Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
          07-12-2023, 02:37 PM
        • jb_Bak
          Sony xbr-65x900c main board issues?
          by jb_Bak
          Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

          Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
          Power Board Connector that goes to Main board
          CN6401
          Pin 01 NC
          Pin 02 NC
          Pin 03 "BL_ON": 0V
          Pin 04 "N/C"
          Pin 05 "STBY 3.3V": 3.5V
          Pin 06 "GND": N/C
          Pin 07 "AC_OFF"...
          09-27-2021, 04:52 PM
        • Loading...
        • No more items.
        Working...