Please help, there are 2 beeps when I plug in the device power cable. But no other reaction, thank you.
PS4 CUH-2016A SAD-003 1-981-769-11 BİOS request
Collapse
X
Related Topics
Collapse
-
by ktmmotocrossHello.
Have this old hp compaq nc6320 that came with one long and one short beep + backlight on. bios battery have only 0.5V. I remove it, but now it start beep some weird way. I think it is bios /one long + two short beeps+ baklight on/, but when i flash new bios from hp, no beeps and no backlight.
i attach record of beeps...04-27-2025, 12:48 AM -
by KappaDevI have an HP Envy x360 15m-dr laptop which sometimes beeps 8 times on startup and sometimes gets no beeps at all (both with no picture).
Power button light comes on, fans spin and stop after a few seconds, then screen stays black with no picture. If the machine decides to beep 8 times, it shuts off immediately after. According to what I could find, 8 beeps was corrupted BIOS.
Made backup of original BIOS (attached). Attempted to flash BIOS with extracted bin file from HP BIOS update. Screen showed "Updating boot block", rebooted and immediately back to 8 beeps and... -
by Loki_FidoHi ya folks,
Hope everyone's having a good day.
I have a HP ENVY x360 2 in 1 Laptop 13-bf0002TU with nothing on the screen.
The laptop starts but no display. Connecting to an external monitor give me nothing too. Ive attached my original backup bios
Make HP ENVY x360 2 in 1
Model 13-bf0002TU
S/N CND3171C5T
Prod ID 6L2F0PA#ABJ
I looked up at this site before writing this request. And there was a link. But i couldn't download any files from it.
Any moderator could look it up, if possible? It says, "Invalid file...-
Channel: BIOS Requests ONLY!
-
-
by mindoverflowhello,
there is an asus gtx1650 which displays fine in windows but if i run a benchmark test it displays artifacts and the driver crashes after a second or two.
I changed pads and thermal paste.
I run mats test but it is reporting 0 errors.
I then tried to run the mods version 400.271_1650 test, it first ran and stopped with a 'breakpoints limit reached after 5 retries' error and the fans went full speed.
After a reboot, I tried to run the test again, but now the test fails and says "ERROR: Couldn't clear GPU's interrupt...02-09-2022, 03:22 PM -
My Hp prodest 400 g5 having no display with or without ram 3 long beeps and 2 short beeps. many bios tried but the problem is same. please help thanks in advance.
- Loading...
- No more items.