HP all in one 24-df0000nt
i need bios for hp all in one 24-df0000nt or 24-df0028ny
Mainboard : DAN14NMB6D0 REV D
Size BIN FILE 16.384MB
Mainboard : DAN14NMB6D0 REV D
Size BIN FILE 16.384MB
-
hello !!!
I need Toshiba Portege R830-1N3 bios file, mainboard model is G2830A
Please helps !!!
I've attached the old BIOS file.... -
Hello,
I got a Lenovo ThinkStation P520 (Type 30BF) from a friend, asking me for a repair. Windows 11 offered a firmware upgrade as an optional update, and it failed.
The emergency flash procedure from the hardware manual has also failed. So, I asked an acquaintance with better skills to flash the BIOS directly.
However, the chip (a Macronix MX25L25673GMI-08G) has a size of 32 MB, and the BIOS file from the Lenovo website (extracted with UEFITool) has a little more than 16 MB. Thus, the software my acquaintance used (SiberiaProg v1.45, with a CH341A Programmer)... -
hi everyone
i need dump file for dell server r220
i have download Flash BIOS executable file but i dont know how to conver it to Bin file
i have check on youtube there is some programs are doing this method of creating Bin file from ExE file .
if anyone has this method please need his supporting .
all the best
EXE file is attched and Original Bin file from the Bios Chip is attached also
and dell website "https://www.dell.com/support/home/en-us/drivers/driversdetails?driverid=mrxv... -
Hi everyone,
I've got a little "problem child": my Dell Latitude 7420 2-in-1, which had a faulty mainboard.
I replaced it, but ever since, the touchscreen no longer works — and honestly, I’m running out of ideas…
In Windows Device Manager, I just see an I2C HID Device with error code 10. Sporadically, the touchscreen is recognized correctly for just a few seconds, but I haven’t been able to determine under which circumstances this happens.
The touchscreen also doesn’t work in UEFI/BIOS, although it’s enabled... -
Hello,
I have an old MASTER TL-240 LED TV. Since it stopped working and it had a DVB-T receiver that is being dismissed in Italy, I've decided to replace the mainboard with a DVB-T2 one.
The original problem was that when switching on the TV, the power LED was transitioning from red to steady blue, without showing video or audio.
After checking some voltages on the power supply board (HKL-240101-B Rev. 1.4, HKL from now on) someone suggested me to replace the mainboard.
Now I have some doubts about how to connect the new mainboard to the old power supply.
First of...
Comment