Graphics card Schematics and Boardviews

[T.Poko]

Re: Graphics card Schematics and Boardviews

Inno3d GTX 980TI
I have a shorted vmem 0ohm and shorted high mosfet(12v), i removed the inductors and injected low voltage and 8amps.
2 of the ramchips got hot and i removed them, they was shorted and i now have 0,8ohms on the board to rest of the ram and controller(gpu).
My question: is there any chance that Gpu could survive this and is any point to proceed to remove all ramchips.

And could someone get me schematics and boardoverview.

Tanks😀

High change the GPU is dead. And this core is difficult to reball if I remember correctly. It's got a bunch of caps under it too.

[tohetlan]

Re: Graphics card Schematics and Boardviews

The gpu is dead, after i removed all ramchips the gpu was still shorted with 1,8ohms and got warm.
I dont have knowledge or equipment to remove gpu.tanks for all responsen.

[frazerxavier]

Re: Graphics card Schematics and Boardviews

Hi everyone
I am looking for a schematic or boardview for an RTX 3070 gigabyte vision OC if anyone has one.
Thanks

dont have board view but schematics.

[b4xt3r]

Re: Graphics card Schematics and Boardviews

hello friends
i'm looking for schematics of msi gtx 970 gaming 4g
a search in this thread showed someone shared boardview and schematics but both archives are corrupted : https://www.badcaps.net/forum/showpo...&postcount=168
thanks
edit: nevermind

[Gips700]

Re: Graphics card Schematics and Boardviews

What program do you guys use for opening (CAD. file) ?

[Gips700]

Re: Graphics card Schematics and Boardviews

(Msi radeon rx 580 armor 4g oc) any one have schematic or boardview ??? Please

[T.Poko]

Re: Graphics card Schematics and Boardviews

It still can be a cap on the GPU but like I said it's very tricky to reball this one. Pass it along to some professionals to try their luck I guess.

[Datapy]

Re: Graphics card Schematics and Boardviews

(msi radeon rx 580 armor 4g oc) any one have schematic or boardview ??? Please

i hope this helps you
[ATTACH]255040[/ATTACH]

[Datapy]

Re: Graphics card Schematics and Boardviews

What program do you guys use for opening (CAD. file) ?

open cad, tvw and others
BoardViewer 2.1.0.8.rar

[Gips700]

Re: Graphics card Schematics and Boardviews

Thank you guys

[noname_ru]

Re: Graphics card Schematics and Boardviews

guys need help, looking for a scheme or boardview r9 290x gigabyte|sapphire ref dising 4gb
need a pwm power harness ncp5230

[woody-009]

Re: Graphics card Schematics and Boardviews

dont have board view but schematics.

Thankyou very much

[arden]

Re: Graphics card Schematics and Boardviews

Hi,

I was looking at the 1070/1080 bordviews and the Y1 is identified as a XTAL 27MHZ SMD 10PF/10PPM TXC/7V27000050 Crystal.

I ordered a few of the following - https://lcsc.com/product-detail/Othe...0_C331559.html

But they are too small, they came in the format SMD3225-4P but I think they need to be either of the following, SMD5032-4P or SMD6035-4P or SMD6036-4P

Might anyone know of a good replacement for the SMD3225-4P variant?

Thanks!
arden

[bhgsmservis]

Re: Graphics card Schematics and Boardviews

Hi,

I nead schematics and (or) boardview for ASUS GTX680-DC2O-GD5

BR,

[Arctyx]

Re: Graphics card Schematics and Boardviews

Hi, does anyone have schematics of a Palit/PNY/Gainward 1070?

https://www.gainward.com/main/vgapro...tab=gy&lang=en

They appear to be exactly the same PCB and cooler.

I have a missing component at SC568, and strangely enough no Vcore, but I have memory and PEX. I can't seem to get anything from enable either.

[bsyak47]

Re: Graphics card Schematics and Boardviews

Thank you very much!

[WebSwat]

Re: Graphics card Schematics and Boardviews

Hey guys!
After reading this 26 pages of conversation, I have two things to point:

-1st: The only people stucking with Geforce's 50's (750/950/1050) are us brazilians and some of french. Maybe it is because we're always overcharged. Maybe because we're just too passive;

2nd: I need some help with the Boardview, Schematic, Datasheet or anything else it might could help me with an EVGA GeForce GTX 1050 Ti SSC.
I've got one with severe short on L11, L10, L9...

[timpul]

Re: Graphics card Schematics and Boardviews

Does anyone have the board view file for the XFX RX560, if so would it be possible for you to share it, please?

[Engr.Ahmad_Aziz]

Re: Graphics card Schematics and Boardviews

Anyone have inno3d geforce gt 630 2gb sddr3 128bit schematic and boardview file plz share it. It will be highly appreciated
Again thanks in advance

[altronikgsm]

Re: Graphics card Schematics and Boardviews

Anyone have boardview or schematic for Gigabyte GTX 750 TI (GV-N75TD2-2GI) rev1.0 Please